Panasonic KX-PS8000 manual Care and Maintenance, Trouble, Possible Cause, Corrective Action

Care and Maintenance

	Trouble	Possible Cause	Corrective Action
On the Maintenance		The imaging unit is	Replace the imaging unit;
Page,one or more dark		scratched.	make sure that the old
vertical lines appear on			imaging unit is not
the print in all colors.			exposed to light for more
			than 45 seconds.
			If a new imaging unit
			does not correct the
			problem:
			BPut the old imaging
			unit back into the
			printer.
			BRepack the new
			imaging unit.
		The fuser is damaged.	Replace the fuser.
A piece of the printed		The fuser’s internal roller	Print 5-10 pages of blank
image is missing and		is not being consistently	pages to clean the roller.
reappears out of place,		oiled.	If you still see the
approximately 129 mm		or	problem:
(5″) down the page.		The fuser’s internal roller	BReplace the oil supply
		is contaminated with	roll.
		toner particles.	If you still see the
			problem:
			BReplace the fuser.
The surface of the		The fuser is near the end	Replace the fuser
printed image appears to		of its useful life.	(depending on your
have vertical scratches			quality needs, you can
(visible by holding the			continue to print until the
print at an angle and			dark vertical lines
observing the “shine” of			appear).
the image).
At first, the scratches
appear only on the
printed image;
eventually, dark vertical
scratches appear on the
unprinted portion of the
page.
Media frequently wraps		The oil supply roll has	Replace the oil supply
around the fuser.		reached the end of its	roll.
		useful life.

119