Danish Interpretation Systems | User Manual |
This setting is used to set the time from the delegate stops talking until the microphone turns off. The default value is 4 sec.
Auto Off Setup
This menu point has two settings:
∙Auto Off
∙Auto Off time
Those settings determine the behaviour of the Auto Off facility for the conference units.
∙Auto Off
Values: {On,Off}
When set to On a conference unit will automatic turn of the microphone when the delegate stops talking. The time is determined by the ‘Auto Off time’ setting.
∙Auto Off time
Values: {from 5 to 60 seconds in 5 second steps}
This setting is used to set the time from the delegate stops talking until the microphone turns off. The default value is 5 sec.
When the system is set to VOX mode Auto Off settings are disabled.
Interpretation setup
The “Interpretation setup” comprises the following entries:
∙Interpreter Channels
∙Language setup
∙Booth Setup
∙Auto Floor
∙Interpreter Lock
∙Channel Display
Interpreter Channels
This setting is used to set the number of Interpreter Channels in use.
Values: {0 to 31}
When set to 0 value no interpretation channels are present in the system. Only ‘Floor’ sound will be present
Channel 0 will always give the original audio (floor).
Language setup
The “Language setup” menu will show the number of channels according to the ‘Interpreter Channels’ settings. :
A channel entry is selected with the select keys
The new language selection is accepted with Enter button and cancelled with Menu button.
Booth Setup
The “Booth Setup” menu will show a list op Booth (1 to 128).
The Interpretation Channels can now be assigned to the Booth. More Booths can be assigned the same channel.
As default Booth 1 is assigned Channel 1, Booth 2 assigned Channel 2 etc.
Auto Floor
When set to ON a language channel with no interpretation will have the Floor sound.
Values: {On, Off}
Interpreter Lock
The Interlock settings are used to setup the interlock between the Interpretation channels.
The settings are:
16 | Manual 01 18 04438 |
|
