LA-311/325 Charging Instructions (cont.)
5 Place units in charging slots.
It may be necessary to press the units down into the pocket to ensure that it is touching the charging contacts.
6 | Verify units are charging. |
| Watch units for 10 seconds before leaving them to charge. Once placed in the |
| charging slots, the red LED on top of Listen’s portable receivers and transmitters will |
| glow continuously for |
| battery status for |
| setting, the red LED will begin to flash indicating that the units are charging. |
| NOTE: If batteries are completely discharged, the red LED will remain solid while the |
| batteries are reconditioned. Unit should begin flashing after |
| LED may flicker during the reconditioning process. |
7 | Verify Full Charge. | |
Each unit’s red LED will stop flashing once charging is complete. Charging time for | ||
| ||
| full recharge on completely discharged batteries is 13 hours. | |
| NOTE: If a unit is removed from the case during the charge cycle, and then | |
| reinserted, it will begin a new charge cycle. | |
| WARNING: The case lid MUST be open or removed while the units are charging. The | |
| charging process generates heat and ventilation is required. It is best to | |
| store your charging case at room temperature away from heat sources | |
| and direct sunlight. |
19
