Liebherr CS 1640 7082 481-01 Please read and follow these instructions, Electrical Safety

Safety

Please read and follow these instructions

These instructions contain Warning and Caution statements. This information is important for safe and efficient installation and operation.

Always read and follow all Warning and Caution statements!

Danger indicates a hazard which will cause serious injury or death if precautions are not followed.

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

IMPORTANT

This highlights information that is especially relevant to a problem-free installation and operation.

Make sure incoming voltage is the same as the appliance rating.

To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction.

Disposal of Old Appliance

Risk of child entrapment. Before you discard your old refrigerator or freezer:

•Be sure to follow your local require- ments for disposal of appliances. Dis- carded appliances can be dangerous.

•Remove the doors.

•Remove the freezer drawers.

•Leave the shelves in place so that children may not easily climb inside.

•Cut off the power cable from the discarded refrigerator. Discard separately from the refrigerator.

Following these instructions reduces the possibility of causing personal injury, especially to children playing.

Contact the trash collection agency in your area for additional information.

Electrical Safety

Connect this appliance to a 110-120 V AC, 15 amp circuit that is controlled by a circuit breaker or fuse. This appliance should have its own separate grounded circuit. Do not use an extension cord.

The power cord is equipped with a three-prong (grounding) plug for your protection against possible shock hazards. To maintain this protection:

•Do not modify the plug by removing the round grounding prong.

•Do not use a two-prong adapter. Where a two- prong wall receptacle is encountered, contact a qualified electrician and have it replaced with a three-prong receptacle in accordance with all local codes and ordinances.

•Do not use a power cord that is frayed or damaged.

3