Liebherr CS 1640 7082 481-01 manual Interior Light, Bulb data, Replacing the bulb

Models: CS 1640 7082 481-01

1 24
Download 24 pages 26.27 Kb
Page 15
Image 15
Interior Light

Refrigerator Compartment

Interior Light

This turns off automatically after the door has been opened for approximately 15 minutes. If it does not turn on when the door is opened briefly, but the temperature display is working, the bulb(s) may be defective.

The light is located behind the cover located at the top of the refrigerator compartment and has two bulbs.

Bulb data:

125-130 V, maximum wattage - 25 W Bulb fitting - E14

Current and voltage must agree with details on the model plate.

Replacing the bulb:

To prevent possible injury due to an elec- trical shock, be sure to disconnect the power cord or turn off the circuit breaker before replacing the interior light bulb(s).

To prevent possible injury due to broken glass, use hand protection when replacing the interior light bulb(s).

1. Unlatch carefully the cover at left, middle and right using a screwdriver - Fig. 15.

Remove the cover.

Figure 15

2. Remove the glass plate - Fig. 16.

 

 

Figure 16

3.

Remove the defective

 

 

bulb. Make sure the seal

 

 

(Fig. 17) is placed on the

 

 

new bulb before installing it.

 

4.

Install glass plate and

Figure 17

 

cover.

IMPORTANT

The glass plate must be inserted to the back completely, otherwise it is not possible to click the cover into place correctly.

15

Page 15
Image 15
Liebherr CS 1640 7082 481-01 manual Interior Light, Bulb data, Replacing the bulb, Refrigerator Compartment