Refrigerator Compartment
Repositioning the shelves - Figure 10
1.Hold the shelf underneath with your hand to avoid from tipping down backwards when removing.
2.Lift the shelf at the front.
3.Remove the shelf forward until the circular cutout of the shelf is in line with the front supports.
4.Lift the shelf up or down and replace in the desired position.
Front supports
Figure 10
If you need space for large bottles and con- tainers.
Place the shelf rails provided on the sup- ports on the left and right at the desired height - Figure 12.
Insert the glass shelves |
|
as shown in fig. 13. |
|
The glass shelf with the | Figure 12 |
raised edge must go at |
|
the back. |
|
If you need to make |
|
space for tall contain- |
|
ers, simply slide the |
|
front half of the sec- |
|
tioned glass shelf care- |
|
fully underneath the |
|
back half - Figure 13. | Figure 13 |
Removing the shelves - Figure 11
1.Follow the first three steps in the chapter above.
2.Lift the shelf down and stop just over the upper vegetable bin.
3.Move the front of the shelf upwards until the shelf is in a vertical position.
4.Turn the shelf counterclockwise and remove.
To avoid it falling down, always hold the shelf with both hands when removing.
Figure 11
To remove the vegetable drawer
Pull the drawer straight out, grip at the back and lift out - Figure 14.
To install the vegetable drawer
Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.
Figure 14
14
