Operation
Setup Mode - Figure 6
= Water quantity for Ice cube tray
If the produced ice cubes of the ice maker are too small, the inflowing water quantity can be adjusted.
= Child lock
The child lock is designed to protect the appliance from being turned off accidentally.
How to adjust the water quantity
•Activate the setup mode by touching the
SuperFrost icon for 5 seconds.
•Touch the freezer compartment Down icon until 
appears in the freezer temperature dis- play.
•Touch the SuperFrost icon
-the display shows 
•Touch freezer compartment Up icon once only so E 4 appears in the display.
Do not increase for more than one step. If the adjusted value is too high the ice cube tray of the ice maker could overflow.
•Touch the SuperFrost icon again.
•Exit setup mode by touching the freezer compartment On/Off icon.
Check the ice cube size within the next days. If the ice cubes are still smaller as desired, follow the steps above again.
How to activate the child lock
•Activate the setup mode by touching the
SuperFrost icon for 5 seconds.
•Touch the freezer compartment Down icon
until
appears in the freezer temperature dis- play.
•Touch the SuperFrost icon
-the display shows 
• Touch the SuperFrost icon again
-the LED 
is lit and the child lock is activated.
•Exit setup mode by touching the freezer compartment On/Off icon.
How to deactivate the child lock
•Activate the setup mode by touching the
SuperFrost icon for 5 seconds.
•Touch the freezer compartment Down icon
until
appears in the freezer temperature dis- play.
•Touch the SuperFrost icon
- the display shows
• Touch the SuperFrost icon again
- the LED 
goes out. The child lock is deacti- vated.
• Exit setup mode by touching the freezer compartment On/Off icon.
Child Lock LED | Freezer compartment Up/Down icons |
Freezer temperature display | SuperFrost icon |
|
Figure 6 | Freezer compartment On/Off icon |
12
