Temperature Display Figure | Liebherr CS 1640 7082 481-01 guide

Operation

Temperature Display - Figure 4

In normal operation, the following settings will be displayed:

•the average refrigerator temperature

•the warmest frozen food temperature.

When starting up for the first time or when the appliance is warm, dashes will appear in the freezer temperature display, until the temperature in the freezer compartment is 32°F (0°C).

The display will flash:

•if you change the temperature or

•if the temperature rises by several degrees, indi- cating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer.

•If “F1” to “F5” appears in the display, the appli- ance has a fault. Have the fault number available when you contact the customer service depart- ment.

Ventilation - Figure 4

The Ventilation switch is used for re-circulated cool air:

You can use the switch as required to:

•chill large quantities of fresh food fast.

•keep the temperature evenly distributed through- out the entire refrigerator compartment. The air will circulate more intensively, keeping all the different areas in the compartment at the same temperature and ensuring all the food inside is chilled at the same temperature.

We recommended you use the ventilation fan if:

•room temperatures are too high (approximately 95°F [35°C] or higher).

•the air humidity is high, during high heat and humidity.

Turning on: touch the Ventilation icon briefly so the LED turns on.

Turning off: touch the Ventilation icon again until the LED turns off.

Audible Alarm Signal - Figure 4

The audible alarm signal helps to protect frozen food and to save energy.

The audible alarm signal is switched off by touching the alarm icon.

Audible door alarm

This sounds when the door has been left open for longer than about 180 seconds. The sound switch- off function is active as long as the door is left open. The alarm automatically switches back to standby when the door is shut.

Audible/visual temperature alarm

It always sounds if the freezer temperature is not low enough. The temperature display and the alarm LED flash at the same time.

This can be caused by:

-warm, fresh food being placed in the freezer,

-too much warm air from the outside entering when re-arranging or removing frozen food,

-a fault in the appliance.

The temperature display will continue to flash until the cause of the alarm has been rectified. It will then stop flashing and light up continually. The audible warning signal is now automatically reset.

Power Failure/FrostControl

Display - Figure 4

If the power failure LED is lit, this means the freezer temperature has risen too high during the last few hours or days due to a power failure. The freezer temperature display flashes at the same time.

•If you touch the Alarm icon now, the highest temperature registered during the power failure will be displayed.

•Check the quality of the food in case it has become too warm or even defrosted.

•The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear.

The display can be turned off by touching the Alarm icon again.

CS 1640 7082 481-01 specifications

The Liebherr CS 1640 7082 481-01 is a highly advanced crawler crane designed for versatile applications in the construction and heavy lifting sectors. Known for its robust build quality and innovative features, this crane provides exceptional performance and efficiency on job sites.

One of the standout features of the Liebherr CS 1640 is its impressive lifting capacity. With a maximum lifting capacity of 1640 tonnes, this crane is engineered to handle even the most demanding lifting tasks. It combines a powerful hoisting system with a sophisticated winch to ensure reliable performance.

The crane's main boom has a variable length, allowing operators to customize it according to their lifting needs. The boom can be extended or retracted easily, enabling flexible operation in confined spaces or at great heights. This adaptability is further enhanced by the ability to fit different attachments, such as jibs and extensions, tailored to specific project requirements.

The CS 1640 features Liebherr's advanced Luffing technology. This system enables precise control of the boom angle, allowing for smooth and efficient positioning of loads. Coupled with a state-of-the-art hydraulic drive system, the crane's operation is seamless, minimizing downtime and maximizing productivity.

Technological innovation is at the forefront of the CS 1640's design. The crane is equipped with an intuitive digital control system that provides operators with real-time data on load weight, boom angle, and operational status. This system not only enhances safety but also improves decision-making on the job site.

Safety remains a top priority with the Liebherr CS 1640. The crane is designed with multiple safety features, including overload protection, emergency stop systems, and advanced monitoring capabilities. These features work together to ensure the safety of both operators and crew members in challenging working environments.

In terms of mobility, the crawler configuration allows the CS 1640 to traverse rough terrain with ease. This makes it an ideal choice for construction sites that may have uneven ground or limited access. Its efficient fuel consumption also adds to its appeal, making it a cost-effective option for long-term projects.

In summary, the Liebherr CS 1640 7082 481-01 is a powerhouse in the crane industry, offering robust lifting capabilities, advanced technologies, and a focus on safety and efficiency. Its versatility and reliability make it a preferred choice for construction and heavy-lifting professionals worldwide.

Liebherr CS 1640 7082 481-01 manual Temperature Display Figure, Ventilation Figure

Models: CS 1640 7082 481-01