LR-300 Wall Transformer

54

LR-300 Wall Transformer Operation

The LR-300 will operate normally when connected to a wall transformer. Use Listen part number
LA-202, available from any Listen dealer. Connect the wall transformer to the jack on the side of
the LR-300 marked “PWR/CHG” and plug the wall transformer into a grounded AC outlet.
You do not need to have batteries installed in the LR-300 to
operate it with a wall transformer.
NOTE: If batteries are in the unit ensure that the battery
selection switch is set properly as shown on page 47. Please
review the information on page 52 for important information
regarding battery type and charging.
The LA-202 wall transformer
plugs into the side of your
portable transmitter or receiver.