III. UNPACKING AND ASSEMBLY INSTRUCTIONS

! WARNING

DANGER

!

BLADES ARE EXTREMELY SHARP. TO

AVOID INJURY WHEN UNPACKING THE

HEDGE TRIMMER, DO NOT GRASP THE

BLADES.

 

! WARNING DANGER !

IF YOU HAVE ANY QUESTIONS, CONTACT YOUR LOCAL DEALER

Your Little Wonder hedge trimmer has been assembled for you at the factory. Before operating be

sure all fasteners are secure, and all guards and safety devices are in place and operating properly.

IV. OPERATION

! WARNING DANGER !

THE OPERATOR OF THIS HEDGE TRIMMER IS RESPONSIBLE FOR ACCIDENTS OR HAZARDS OCCURRING TO HIMSELF, OTHER PEOPLE OR THEIR PROPERTY.

A. INSTRUCTIONS FOR PROPER OPERATION

!

WARNING

DANGER

!

 

BLADES COAST AFTER RELEASING THE

 

SWITCHES

 

KEEP A FIRM GRIP WITH ONE HAND

ON EACH HANDLE WHILE BLADES ARE

 

MOVING AND/OR MOTOR IS

 

 

RUNNING.

 

DO NOT STAND ON THE TOP OF A

 

LADDER WHILE TRIMMING.

 

MAKE SURE YOUR LADDER OR OTHER

SUPPORT IS STABLE AND ON FIRM

 

GROUND.

 

 

KEEP A SURE FOOTING.

 

 

DO NOT OVERREACH.

 

IF YOUR TRIMMER BECOMES JAMMED,

TURN OFF THE HEDGE TRIMMER.

 

MAKE SURE BLADES HAVE STOPPED

 

COMPLETELY, THEN REMOVE

 

6

THE OBSTRUCTION.

 

 

 

 

Securing the

extension cord.

Bend the extension cord about 6" from the plug end. Push that bend through the oblong opening in the back of the handle. Then loop the bend under the cord retaining clips as shown. This will prevent the extension cord from detaching from the hedge trimmer plug.

Misuse of this Hedge Trimmer will void the warranty. ie: cutting hedges or shrubs over 1/2" in diameter or foreign objects such as wires, rocks, or fences. Before trimming check work area for foreign objects such as wires, cords, glass, fences, or rocks. Be sure to remove any foreign objects from the work area. Failure to properly maintain this hedge trimmer will void the warranty.

Page 6
Image 6
Little Wonder 2412, 3022, 3010, 2410 If YOU have ANY QUESTIONS, Contact Your Local Dealer, Instructions for Proper Operation