Drain Port

Oil Fill Port

•To drain the oil, tip unit back, place an empty container that can hold at least 1 Gallon (4 Liters) of oil under the log splitter.

•Use an Allen Wrench [P/N 510543 (8mm)] and remove Drain Port Plug and the seal in the aluminum bottom cover plate of the log splitter.

•Hold the handle, move unit up a little and position it under the angle. Using an Allen Wrench, unscrew the Dipstick and open the Oil Fill Port to let air in and help the oil flow out. Wait until the oil completely escapes from the oil reservoir.

•Reinstall the Drain Port Plug and the seal. Be careful not to damage the threads of the Aluminum Bottom Cover.

•After the used oil is drained, pour approximately 0.8-0.9 of a gallon (3-3.3 liters) of recommended oil into the Oil Fill Port.

•Clean the Dipstick and insert it to check the oil level; it should be between the two notches on the stem. If level is low, add recommended type of the hydraulic oil. If the level is too high, poor out a little at a time into a container.

IMPORTANT!

IF THE OIL LEVEL IS TOO HIGH THE HEAT WILL NOT BE DISSIPATING QUICKLY ENOUGH

AND THE TEMPERATURE OF THE HYDRAULIC SYSTEM WILL RISE.

IF THE OIL LEVEL IS TOO LOW IT MAY CAUSE CAVITATION*.

*Reference: Cavitation occurs when the volume of hydraulic fluid demanded by any part of a hydraulic circuit exceeds the volume of fluid being supplied. If there is an air bubble in the system, the force applied gets used compressing the air in the bubble rather than moving the piston. This affects the efficiency of the system. In this case, Force (Rated 5 tons) will be cut down.

•Reinstall the Dipstick and the seal. Be careful not to damage the threads of the Dipstick Plug and Aluminum Top Cover.

•Clean thoroughly.

•Loosen air bleed screw, turn 3-4 times.

•Purge air from the hydraulic system by cycling the pressure plate back and forth 3 to 4 times.

WARNING

DUMPING USED HYDRAULIC OIL IN THE ENVIRONMENT IS FORBIDDEN. THE FLUID MUST BE DISPOSED IN ACCORDANCE WITH THE LOCAL ENVIRONMENTAL RULES AND PROCEDURES.

J. Sharpening the wedge

WARNING

BEFORE PERFORMING ANY MAINTENANCE BE SURE THAT:

•LOG SPLITTER IS DISCONNECTED FROM POWER SOURCE.

•PUSHER PLATE IS FULLY RETRACTED (RETURNED TO THE LOWEST POSITION) AND NO RESIDUAL HYDRAULIC ENERGY IS LEFT IN THE SYSTEM.

•OIL HAS COOLED.

Sharpen the splitting wedge, as needed, using a fine-toothed file to remove any burrs, nicks or flat spots from the wedge.

14

Page 14 Page 16
Page 15
Image 15
Little Wonder 5000 owner manual Sharpening the wedge
Page 14 Page 16

5000 specifications

The Little Wonder 5000 is an innovative lawn care tool that seamlessly blends advanced technology with user-friendly features to make landscaping tasks easier and more efficient. Designed for both professional landscapers and homeowners, this powerful machine focuses on delivering top-notch performance while ensuring ease of use.

One of the standout features of the Little Wonder 5000 is its robust engine, which provides the necessary power to handle a variety of tasks. With a high-performance gas engine, it offers an impressive horsepower rating, making it suitable for heavy-duty jobs such as leaf collection, lawn debris removal, and yard cleanup. The engine is engineered for reliability and longevity, ensuring that users can depend on it for consistent service.

In addition to its power, the Little Wonder 5000 includes a wide capacity debris bag that can hold a substantial amount of leaves and yard waste. This allows users to work longer without frequent stops to empty the bag, enhancing productivity and efficiency. The bag is designed with a quick-release mechanism, enabling fast and easy dumping when it’s full.

The machine also features a patented air management system, which optimizes airflow for maximum suction power. This system allows the Little Wonder 5000 to capture even the smallest debris, such as twigs and small leaves, ensuring that lawns and gardens are kept immaculate. Furthermore, the design minimizes clogging, enhancing the overall user experience by allowing uninterrupted operation.

Portability is another key characteristic of the Little Wonder 5000. Constructed with a lightweight frame and equipped with durable wheels, this machine is easy to maneuver across various terrains. Its ergonomic design ensures comfortable handling, reducing the strain on the user during extended periods of operation.

Another notable technology incorporated in the Little Wonder 5000 is its adjustable height feature, which allows users to customize the suction height to suit different types of debris and grass lengths. This adaptability makes it a versatile tool for all seasons.

In conclusion, the Little Wonder 5000 is a powerful and efficient lawn care solution that combines a strong engine, a large debris capacity, advanced air management technology, portability, and customization options. Whether you are a professional landscaper or a homeowner looking to maintain an immaculate yard, this machine is engineered to meet your needs and exceed expectations.
Top Page Image Contents