Storage:
A. Preparing for Long-Term (Two Months or More) Storage
1.Clean the exterior surfaces of the unit (including engine).
2.Change the Oil and Filter while the engine is still warm.
3.The fuel system must be completely emptied, or the gasoline must be treated with a stabilizer to prevent deterioration. To empty the fuel system, drain the fuel tank and carburetor or run the engine until the tank and system are empty. Drained fuel may only be stored for 30 days. If a stabilizer is chosen, follow the manufacturer’s recommendation by adding the correct amount of additive for the amount of fuel to be stored. Fill the tank with this clean, fresh gasoline and run the engine for 2 to 3 minutes to get the stabilized fuel into the carburetor.
Intake Hose and Discharge View
4.Remove the spark plugs and add one tablespoon of engine oil into each spark plug hole. Install plugs and ground spark plug
5.Store the unit and all of it’s components in a clean, dry, well ventilated,
74 
79
39 | 65 | 80 | 75 |
|
|
|
78 | 76 |
|
66
72
69
73
76
70
| 73 |
71 | 76 |
| 67 |
15
