1.Locate and open sealed bag with 3 screws, 3 split washers, clamp plate #2 and
2.Remove plastic tube and gear case cover #4 from the threaded shaft.
3.Place plastic guard over the gear case flange, and place clamp plate #2 over the plastic guard. Align holes and attach it with three screws to the trimmer attachment assembly. (Picture 3)
4.Place gear case cover #4 onto the gear shaft. (Picture 4)
5.Lock the gear shaft by inserting the supplied pin through the slot in the plastic guard and into the aligned openings in the gear case cover and gear case (Picture 5). Screw in the spool holder with the spool to the gear shaft by turning it counter clockwise (Picture 6). Hand tighten it securely and remove pin. (Picture 7)
|
|
| 2 |
|
|
|
|
|
| 4 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
|
| 3 |
| Plastic guard |
|
|
|
|
|
|
|
|
| |
Picture 1 |
| Picture 2 |
|
| Picture 3 |
| Picture 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Picture 5 | Picture 6 | Picture 7 |
5