SAFETY PRECAUTIONS
TRAINING
1.Regard the unit as a piece of power equipment and teach this regard to all who operate this unit.
2.Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
3.Never allow children, teenagers or people unfamiliar with these instructions to use this piece of equipment.
4.Avoid operating unit while people, especially children or pets, are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
5.Be sure you know how to stop the
6.When using the
PREPARATION SAFETY
1.The use of personal protective equipment, such as (but not limited to) protection for the eyes, ears, feet and head is recommended.
2.While operating, always wear substantial foot wear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.
3.Area should be free of all obstacles and debris.
ENGINE SAFETY
1.Handle gasoline with care; it is highly flammable.
2.Use an approved gasoline container.
3.Always add fuel before starting the engine.
WARNING
DO NOT FILL TANK COMPLETELY FULL.
DO NOT SMOKE WHILE YOU FILL FUEL TANK.
DO NOT REMOVE GAS CAP IF ENGINE
IS RUNNING.
DO NOT OPERATE ENGINE IN A
CONFINED SPACE WHERE DANGEROUS CARBON MONOXIDE FUMES CAN COLLECT.
4.Fill the fuel tank outdoors.
5.If fuel is spilled, do not attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.
OPERATIONAL SAFETY
1.Carefully read and follow all caution stickers.
2.Operate only in daylight or good artificial light.
3.Do not operate machine unless all guards, shields and covers are in place and in proper working condition.
4.It is essential all operator safety mechanisms be connected and in operating condition prior to use.
5.Do not change the engine governor settings or
6.Disengage all blade and drive clutches (release bail) before starting.
7.Start the engine carefully with feet well away from the blades.
8.Do not put hands, feet or clothing near rotating parts while the unit is being operated.
9.Travel up and down slopes at a 45° angle rather than across, to prevent unit from tipping over.
10.Exercise extreme caution when changing direction on slopes. Do not get too close to sharp
11.Use caution when backing up or pulling the unit towards you.
12.Stop the blades if unit has to be tilted for transportation, when crossing surfaces (i.e. sidewalks, driveways, stepping stones, etc.) or when transporting the unit to and from the area being worked on.
13.Never pick up or carry a
4
