Loewe 32 HD/DR+ manual Operating other Loewe equipment with the RC3 remote control

Operating additional equipment

Operating other Loewe equipment with the RC3 remote control

You can operate various Loewe equipment with this remote control. Further information can be found on the next page.

TV

DVD STB

VCR	Select VCR, DVD or a Set Top
	Box with the switch.

Default options are Loewe video recorders, Loewe DVD recorders and the d-box common in Germany for STBs (Set Top Box). For operation of a Loewe DVD player the remote control must be switched over (see next column).

Use the drive buttons in TV- and STB position for VCR, DVD or Digital Recorder You can switch over the six drive buttons both for TV and STB for operating a VCR or DVD player/recorder. Operation of the built-in Digital Recorder Plus is specified ex-factory.

Switching over the remote control for operating equipment of other manufacturers or for a Loewe DVD player You can switch over the remote control for VCRs, DVD players and Set Top Boxes if the infrared code of the equipment type is listed in the code list or is in the code memory of the RC3.

Switching over is done on the one hand by entering a four-digit code and on the other hand the remote control suggests codes which you can test on the equipment.

If you cannot find the equipment in the code list, try a suggestion from the remote control. Even if the manufacturer of the equipment is included in the code list, it is possible that it cannot be operated. Not all functions on the RC3 are available for this equipment.

Switching over the remote control – with code input – e.g. to the Loewe DVD player Look for the code number of your equipment in the code list. The list is sorted according to

Once the code has been accepted with two flashes, you can test the functionality of the device you have just programmed.

If the device cannot be operated or is difficult to operate, repeat the code input with the next code from the list. If no other codes are specified for this manufacturer, try a code suggested by the remote control.

Switching over the remote control – with the suggestions by the remote control

Switch on the device to which you want to set the remote control. Standby is not sufficient!

DVD	STB Using the switch select whether
	TV
VCR	you want to switch over to a VCR,
	DVD player or a Set Top Box.

Press the END and * EPG but-

EPG tons at the same time (5 secs). The display at the top left of the

remote control flashes twice.

wxyz Enter the numbers 991 one after the other. The display flashes once

TV

DVD STB

VCR

First turn the switch to the main

equipment type Ð DVD, VCR, STB Ð and alpha- betically according to manufacturer. You will

wxyz

after each number is entered.

function TV or STB.

Press the END and * EPG but-

find one or more code numbers next to the manufacturer name.

PIP

Press the # PIP button to select the first code.

EPG

wxyz

tuv

tuv

TV

DVD STB

VCR

PIP

tons at the same time (5 secs). The display at the top left of the remote control flashes twice.

Enter the numbers 988 one after the other. The display again flashes twice.

Now turn the switch to the required function for the drive buttons. DVD, VCR or TV if the Digital Recorder is to be used.

Press the # PIP button to com- plete the setting. The display flashes twice.

DVD	STB	Using the switch select whether
	TV
VCR		you want to switch over to a
		VCR, DVD player or a Set Top
		Box.
		Press the END and * EPG
	EPG	buttons at the same time (5
		secs). The display at the top left
		of the remote control flashes
		twice.
		Enter the four numbers from
	AV
		the code list one after the other
	jkl
		(0539 for Loewe DVD player).
	def
		The display flashes once after
	wxyz
		each number is entered. Twice
		after the last number.
		If the number was incorrect, the
		display flashes for longer. The
		code number has not been
		accepted.

Hold the remote control pointed towards the device you want to switch over to. Watch the device.

Now press the ￿ (Play) or O (On/ Off) button on the remote control. Wait a moment for the reaction of the device. If the device does not react, the code is incorrect.

PIP	Press the # PIP button to call the
	next code.
	Press the ￿ (Play) or O (On/Off)
	button again.
	If the device reacts, press the
EPG	* EPG button to confirm the
	code.

21

BAQ2550H_31310_021_4_GB 21 22.07.2004, 10:15 Uhr