Loewe 32 HD/DR+ IR Link

Operating additional equipment

Calling an AV program in the AV selection list

Call AV selection list

Select AV socket or VIDEO for

VCR station.

Now you will see the playback from the con-

nected AV unit.

Calling an AV in the station table

Call the station table

In the numeric sorting you will always find the AV

sockets at the top of the list without station num-

bers.

Mark the AV socket

Call the marked AV socket

Now you will see the playback from the connected

AV unit.

Video playback

There are several ways to see the picture and

hear the sound of the VCR, DVD player or

camcorder on your TV:

1. Use the Euro-AV sockets on the TV and VCR.

This is the best way to get a good picture and

sound quality. For camcorders and digital

cameras it is best to use the front sockets

AVS.

If you are playing back from a VCR with

Digital Link Plus, the VCR picture is shown on

the current station slot.

If you are playing back from a standard VCR,

DVD player, camcorder or digital camera,

select the AV socket to which the video signal

is connected in the AV selection list

(button 0 AV) or the station table.

Video recorders emit a switching voltage

during playback which the TV set can decode

(can be activated in the connection wizard or

set Settings – AV Settings – Allow switching

voltage to ”Yes” in the TV menu). Then the

VCR picture is shown on the current station

slot as in Digital Link Plus VCR’s.

2. You can also control logged-in Loewe VCRs

and DVD players with the video menu bar.

See page 18 for more details.

3. Use the antenna connection between the

VCR and the TV. The sound is only transmitted

in mono. Select the first menu item, e.g.

VIDEO, in the AV selection.

Channel overview: TV Numerical

AVS

AV3

AV2

AV1

0 VIDEO

1 ARD

2 ZDF

3 SAT.1

4 RTL

5 VOX

6 S–RTL

7 N–TV

8 DSF

9 TM3

10 PRO7

11 RTL 2

12 WDR 3

13 BR 3

14 HR

15 MDR 3

0 9

Select and

press OK to proceed Menu

Info

End

Change sorting

Change programs

DR archive

Favourite programs

... Select program:

INFO

END

VIDEO AV1 AV2 AV3 AVSAV Selection

IR Link

Your TV set has a socket for an IR Link (IR) and

a cable with a jack and IR emitting diode is

also supplied.

This enables you to control most other remotely

controlled devices, such as a concealed d-Box

or a video from a different manufacturer, by

using the TV set’s remote control. Insert the

jack of the infrared emitting diode cable into

the IR socket on the back of your TV. The infra-

red emitting diode on the end of this cable

must be placed in front of the concealed device.

For transmission, the TV must be switched on.

You can order a nap strip from your dealer

(Loewe spare parts no. 29337.001) to help lay

the cables. The burl tape is self-adhesive; re-

move the protective film. Affix the burl tape on

the wall of the shelf or cabinet and press the

cable into the burl tape. The burl tape can be

split Into several pieces using a knife. To oper-

ate the concealed video recorder, point the

infrared remote control at the TV set.

BAQ2550H_31310_021_4_GB 22.07.2004, 10:15 Uhr20