Loewe Xelos A 37, A 32, A 37 manual Operating additional equipment, AV2 C OUT AUDIO, Digital

Operating additional equipment

Connect Loewe DVD Preceiver Auro 8116 DT and Tremo loudspeaker system

You can play audio signals from the TV or DVD player in cinema quality with these components. The Tremo system includes 5 speakers for the front, center and surround reproduction in addition to the subwoofer illustrated below. The center signal can be reproduced alternatively by the TV speakers. Connect the cubic socket on the DVD Preceiver to the “Master” cubic socket on the subwoofer. Use the cubic plug cable enclosed with the DVD Pre- ceiver. Plug the white plug (without kink protection) into the cubic socket on the subwoofer For TV as a center loudspeaker connect “AUDIO IN C” on the TV set to “PRE OUT C”on the DVD Preceiver with a cinch cable.

Connect the digital audio output of the TV set “AUDIO DIGITAL OUT” to the “DIGITAL IN” input of the preceiver with a cinch cable. Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver with the L-Link cable (provided with the Preceiver). Switch on the TV set and the Preceiver. Via the L-Link the TV recognizes whether the Preceiver is connected. Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set the listener/speaker distances and adjust the speaker levels. Please consult the DVD Preceiver manual.

If you want to listen to the sound over the TV speakers temporarily, call the Sound menu, select “Sound via“ and then “TV“. If you want to listen to the sound over the Loewe Auro system, select “Auro“ under “Sound“.

Power OUT		ON
R
Surr.		OFF
L
R			AV2 C OUT AUDIO	Service
Front C
	Bass Intensity		DIGITAL
L
Center to	Min.	Max.
	Line IN	Phase
Sat TV	Right Subw. Left 0	180
Slave	Surr.
	Front
	Right Center Left
System connector
		230V~50/60Hz
Master

	PREOUT		AUX1 IN AUX OUT AUX 2			TO TV	AM GND FM (75 Ω)
FL	C	FR
			L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R	TV	EXT
				12V/15mA		L-Link

25