59 -
Problem Possible cause Remedy
No power The mains cable is not plugged in.. Fix the mains cable firmly into a socket.
No image The television is not switched to receive signals
from the DVD recorder.
Select the right video input mode on the television, so that
the image from the DVD recorder appears on the television
screen.
The SCART cable is not properly connected. Connect the SCART cable properly.
The television that is connected is switched off. Switch the television on.
No sound The connected audio equipment is not switched to
DVD playback.
Set the audio receiver so that you can hear the sound playing
on your DVD recorder.
The audio cables are not properly connected. Connect the audio cable properly.
The connected audio equipment is switched off. Switch on the audio equipment that is connected.
The audio connection cable is faulty. Change it.
Inferior picture quality. The disc is dirty. Clean the disc.
Playback not possible. There is no disc. Insert a disc. (Check that the disc display comes on in the
display window.)
A non-playable disc has been inserted. Insert a writable disc. (Check the disc type, the colour system
and the region code.)
The disc has not been inserted with the playable
side downwards.
Insert the disc with the playable side downwards.
The disc has not been properly placed in the guide. Position the disc properly into the guide in the disc drawer.
The disc is dirty. Clean the disc.
A security rating has been set. Cancel the security rating or change the protection.
There is interference with images from an
external source.
The video signal from the external component is
copy-protected.
You cannot get a connection from this recorder. Connect the
component directly into the television.
A channel is skipped when using P+ / P-. The channels have not been saved in the recorder. Retune the channels. See channel tuning on pages 18-19.
The image or sound on the transmission chan-
nel is weak or absent.
Loose antenna or cable. Tighten the connections or change the cable.
The camcorder image is not displaying. The camcorder is switched off. Switch the camcorder and make sure your are using it
properly.
The camcorder image is not appearing on the
television screen when using the A/V input or
DV IN to the DVD recorder.
The DVD recorder AV selection is wrong. Select the input channel (AV1, AV2, DV etc.) with DVD-AV.
A disc that was recorded to from this DVD
recorder cannot be played on a different DVD
player.
The disc was recorded in video mode. Finalising the disc (see page 26)
What to do, if ... 32122 DVD Rec_Centros_GB.indb 59 32122 DVD Rec_Centros_GB.indb 59 26.04.2005 11:24:0226.04.2005 11:24:02