Automatic programming, Station sorting | Loewe Spheros R 32 specs

Connect/disconnect Back

Antenna cable(s) for: Antenna/cable (analogue) DVB-T

DVB-C

DVB-S

to antenna socket(s):

ANT TV

ANT TV ANT SAT

Connect antenna cable(s)

Initial installation

First installation

Automatic programming

Automatic programming of the TV set is started the ﬁrst time you switch it on. Follow the menus.

If you only receive one satellite ...

8.	In the following menu, specify whether the station search should take place
	in the high and low band ("Yes") or only in the low band ("No").
	Note: For most satellites, a station search is required in both bands.
9.	For the low band and high band, the standard frequencies 9750 MHz (9.75

By pressing in one of the arrow directions, you can choose the

settings ...

... and conﬁrm your settings by pressing OK. You then go to

GHz) and 10600 MHz (10.6 GHz) are preset.

If your satellite antenna is equipped with an LNC (LNB) with a divergent

oscillator frequency, specify the corresponding frequency for low and high

band respectively. Note: The correct display of the received frequencies in

OK	the next menu.

Back to the previous menu.

1. First you have to select the menu language.

2. By pressing the OK button, you can call the menu "Connect antenna cable(s)". If you want to receive digital stations via satellite, then choose "DVB-S" - conﬁrm using the yellow

coloured key. If you also want to

receive digital terrestrial stations (DVB-T), then select "DVB-T". Also

select "Antenna/cable (analogue)"

- this way the standard analogue stations can also be searched for and OK Proceed

saved. If you can receive digital stations from the cable network, then select "DVB-C" using the yellow coloured key.

3.For the country-speciﬁc station sorting and for presettings for DVB-T and DVB-C, enter the location at which the TV set is operated.

4.If you have selected "DVB-T", you then reach the menu "Antenna DVB-T". If you use an active antenna, then select "yes (5V)".

5.If you have selected „DVB-C“, you generally leave the symbol rates and modulation types unchanged.

If other symbol rates are used in your cable network for broadcasting, enter the values with the numeric buttons of the remote control. If only one symbol rate is used, enter the same value for both symbol rates. If other modulation types are used for broadcasting in your cable network, select them in the menu. If only one modulation is used, select „none“ for modula- tion type 2.

If necessary, ask your specialist dealer about the necessary settings for your cable network.

6.In the "Select satellite installation" menu, make the selection that corre- sponds to your satellite antenna installation.

Note: If you have any questions on how your satellite antenna installation is conﬁgured and on the antenna settings, consult your antenna installer or your specialist dealer.

7.Select the satellite the antenna is directed at, such as ASTRA1.

the "TV menu – Settings – Stations – Manual adjustment" depends upon

this setting.

10. You should receive a picture with sound with the settings previously made

(only for ASTRA 1 and HOTBIRD). Then press OK.

11. In the "Pre-programming" menu, select the factory-set pre-programming to

programme the satellite stations quickly.

To ensure all stations that can be currently received are searched for and

saved, select "No" at this point.

Symbol rates: The standard symbol rates 22000 and 27500 are preset. If you

would like to receive stations with different symbol rates, specify the cor-

responding values here using the numeric buttons on your remote control.

12. Press OK to obtain an overview of the settings with which the automatic

programming is to take place.

13. Press the OK button again and the station search will start. The TV set

searches for, sorts and saves all the TV stations that can be received, accord-

ing to your settings and the antennas connected.

14. When the TV stations are saved, you will receive a corresponding message.

15. Press the OK button and the set then searches for the radio stations.

16. The TV set searches for, saves and sorts all radio stations which can be

received with your antenna system.

17. Then log on your video equipment, decoder and audio system using the

connection wizard and connect these to the TV according to the connection

diagram displayed. If you want to connect other equipment later, you can

ﬁnd information as of page 32.

You can repeat the initial installation at any time, e.g. after moving house. Call the index using the INFO button (in the TV mode, if no menu is opened). Select the index item "Repeat initial installation" (you will ﬁnd this listed separately before the letter A). Press OK to start the initial installation.

Note: For DVB-T stations in GB the stations are tied to "Logical Channel Num- bers" -- "LCN" and sorted from 1-799. Digital stations without "LCN" are stored from 800 onwards. Analogue stations are stored from 1001.

Station sorting

Note: not with DVB-T stations in GB.

You can change the station sorting that was carried out automatically later at any time, see "TV menu – Settings – Stations – Change stations".

Downloaded From TV-Manual.com Manuals

13 -

Spheros R 32, Spheros R 37, Spheros R 26 specifications

Loewe Spheros R 26, Spheros R 32, and Spheros R 37 are innovative audio solutions designed to meet the needs of both residential and commercial environments. These devices exemplify a perfect blend of cutting-edge technology, sleek aesthetics, and superior functionality, making them highly sought after for enhancing audio experiences.

The Loewe Spheros R 26 is a compact speaker that delivers impressive sound quality despite its small form. One of its standout features is its high-efficiency driver, which allows for crystal-clear audio reproduction across a wide frequency range. The speaker is equipped with Bluetooth capabilities, facilitating seamless wireless connectivity with a variety of devices, such as smartphones, tablets, and computers. Additionally, the Spheros R 26 features an integrated amplifier, eliminating the need for external components, making it a versatile choice for any setup.

Moving up in size, the Spheros R 32 offers added power and depth. This model includes advanced audio technologies, such as a sophisticated DSP (Digital Signal Processing), which optimizes sound performance according to the environment. With a focus on delivering dynamic bass and clear highs, the Spheros R 32 enhances the listening experience for music enthusiasts and casual listeners alike. Its elegant design makes it a stylish addition to any room, while its robust connectivity options, including Wi-Fi and Ethernet, provide flexibility and convenience for streaming purposes.

The Spheros R 37 stands at the pinnacle of the series, designed for audiophiles who demand the utmost in sound fidelity. Featuring an expansive soundstage, the Spheros R 37 integrates multiple drivers and a passive radiator system, allowing for deep bass and a rich midrange, which is essential for reproducing complex musical compositions. The inclusion of advanced features such as multi-room audio capabilities allows users to synchronize music playback across different areas of their home or venue. Furthermore, the Spheros R 37 supports high-resolution audio formats, ensuring that every detail is captured and presented accurately.

In summary, the Loewe Spheros R 26, R 32, and R 37 represent a comprehensive range of audio solutions that cater to different needs and preferences. With features like Bluetooth connectivity, advanced DSP technology, and multi-room capabilities, these speakers are designed to deliver exceptional sound quality and convenience. Whether for personal enjoyment or professional use, the Spheros series combines innovation with aesthetic appeal, making them a valuable addition to any audio setup.

Loewe Spheros R 32, Spheros R 37, Spheros R 26 Automatic programming, Station sorting

Models: Spheros R 32 Spheros R 37 Spheros R 26