First installation
Batteries – Remote
Control
To insert or replace the batteries, press where an arrow is imprinted. Slide the battery compartment cover downwards and remove it. Insert Alkaline Manganese LR 03 (AAA) batteries and make sure + and – poles are located in the correct positions.
+
+
Connecting
Remove the cable cover at the back of the unit by pressing down simultaneously both plastic locking tabs (see arrows in figure), and then pulling off the cover.
Move the cables downwards and outwards. Open the cable holder in the lower area and lay the cables in the cable holder. When all cables are positioned correctly, close the cable holder. Refit the cover by inserting it into the two lower slots and clipping it shut at the top.
Satellite antenna
Connect the cable of the satellite antenna to the antenna socket (F socket) of the television set. Ensure that the pin in the centre of the F plug is not bent and is not in contact with the external metal ring.
Then slide on the cover again.
Notes on battery disposal:
|
|
|
| The original batteries do not |
|
|
|
| contain any pollutants such as |
|
|
|
| cadmium, lead and mercury. |
|
|
|
| Used batteries do not belong in |
|
|
|
| |
|
|
|
| the domestic waste. They must |
|
|
|
| be taken to the appropriate |
|
|
|
| collection points according to |
|
|
|
| the national laws. Ask your |
|
|
|
| |
|
|
|
| dealer. |
Set remote control to TV set operation | ||||
|
| TV | Press TV button | |
Page 26/27 describes how you operate other Loewe units.
Mains
Connect the AC adapter to a 230
Plug the low voltage cable of the AC adapter to the “AC adapter” socket on the TV set.
Switching on
The indicator and the on/off switch are combined in one unit.
Press the on/off button. The green ON indicator lights.
When you switch on for the first time the automatic programming of the TV is prepared. If the equipment has already been in operation, you can repeat the first commissioning, e.g. after moving house. To do this, call the ”Main information” with the INFO button. Then select ”First installation” in the ”Index”. Then start ”First installation” with OK.
➝
9
LCD_SAT_31715022_GB | 9 | 10.08.2004, 15:44 Uhr |
