Logan Graphic Products F200-2 instruction manual Identification, Assembly

Instruction Manual PRECISION SANDER ELITE

Model F200-2

Identification

A.Wheel - 10 lb. wheel which rotates in either direction for sanding.

B.Handle - Handle to rotate wheel.

C.Alignment Bar - Fence stop that the frame lines up against for sanding.

D.Micro-stops- Alignment bar adjustments for perfect 45˚ angles.

E.Cleaning Bar - Used to loosen built-up saw dust on sanding wheel.

F.45˚ Triangle - Used to adjust micro-stops to 45˚.

G.Wheel Wrench

H.Micro Stop Wrench

A

C

B

E

F

D

Assembly

1.Remove sanding wheel from base board using wrench supplied. SAVE WRENCH & SCREW (Fig. 1).

2.Discard washers and nut.

3.Attach sanding wheel to top plate using screw and wrench from step 1 (Fig. 2).

GH

Fig. 1

Fig. 2

2

Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com