Logitech manual You have now successfully connected your BH970

BH970 Wireless Mono DECT Headset

Test call from PC (softphone)

1.Install the PC Suite . Software available online here: www.logitech.com/support/ BH970.

2.Open your PC phone software (softphone) and set the BH970 as speaker and microphone in the softphone’s audio configuration settings.

3.Ensure the headset is docked, and then press and hold the softphone button on the base keypad until the softphone icon changes to .

Troubleshooting

If you cannot hear anything or the sound is distorted during the desk phone call, try rotating the clear dial tone switch from A-G until the sound is optimal. For more information, see “3.1 Configuring for Desk Phones” in the BH970 Wireless Mono DECT Headset User’s Guide at www.logitech. com/support/BH970.

4.Make a test call. Put on the headset, and dial a friend or colleague´s phone number using the softphone software. The softphone icon will change to .

5.When finished, end the call.

You have now successfully connected your BH970

English  11