Stove Installation (for qualified installers only)

7

SAFETY NOTICE:

Please read this entire manual before you install and use your new room heater. Failure to follow instructions may result in property damage, bodily injury, oreven death. Contact local building orfire officials about restrictions and installation inspection requirements in yourarea.

Always use gloves when operating a hot stove. The door handles, loading lid, bypass handle, and other components become very hot during normal use.

Planning The Installation

We suggest that you have an authorized Travis Industries dealer install your stove. If you install the stove yourself, your authorized dealer should review your installation plans.

Check with local building officials for any permits required for installation of this stove and notify your insurance company before proceeding with installation.

Preparation for Installation

Check for damage to the exterior of the stove.

Check the interior of the firebox to verify all components are in place.

The stove can be lightened for transportation by removing the doors, loading lid, and firebricks. Replace these components before operation.

Install the bypass handle (included in the owner’s pack - see page 10).

Stove Installation Considerations

The table below details the six most common types of installations and the considerations for each type. Alternative methods of installation are available if they comply with local building codes.

Installation Type

Considerations

 

 

 

Standard Ceiling with a Factory Built Chimney

Requires ceiling and roof penetration

(Page 16)

Provides best draft

 

 

 

Cathedral Ceiling with a Factory Built Chimney

Cathedral style chimney support required

(Page 16)

Provides best draft

 

 

 

Hearth Stove Positive Connection

Utilizes existing masonry fireplace (not approved for zero

(Page 17)

clearance (metal) fireplaces)

 

Provides good draft due to full reline

 

Easier to clean than direct or horizontal hearth stove

Hearth Stove Direct Connection

Utilizes existing masonry fireplace (not approved for zero

(Page 17)

clearance (metal) fireplaces)

 

Requires construction of a "block-off plate"

 

Draft reduced due to elbows & chimney cross section

Interior Masonry Chimney

Utilizes existing masonry chimney (not approved for zero

(Page 18)

 

clearance (metal) fireplaces)

 

 

 

© Travis Industries

100-01177

4060802

Page 7
Image 7
Lopi 028-S-75-2 owner manual Planning The Installation, Preparation for Installation, Stove Installation Considerations

028-S-75-2 specifications

The Lopi 028-S-75-2 is an innovative and efficient heating solution, designed to provide optimal warmth and comfort in various residential settings. This advanced model stands out due to its superb energy efficiency, making it an ideal choice for homeowners seeking environmentally-friendly heating options without compromising on performance.

One of the main features of the Lopi 028-S-75-2 is its exceptional heating capacity. This unit is engineered to deliver an impressive output, ensuring that even larger spaces can be effectively heated. Its high BTU (British Thermal Unit) output means that the Lopi 028-S-75-2 can quickly warm up a room, making it a reliable option during the colder months.

The technology behind this model incorporates advanced catalytic combustion systems, which enhance efficiency by promoting the complete burning of fuel. This results in reduced emissions, making it a more eco-conscious choice. The inclusion of secondary combustion technology further maximizes heat production, ensuring that more energy is extracted from the fuel used.

Another characteristic that makes the Lopi 028-S-75-2 a standout is its build quality. Constructed from robust materials, this unit is designed to withstand the rigors of daily use while maintaining aesthetic appeal. Its sleek design suits a variety of home interiors, allowing it to blend seamlessly into any décor.

Ease of use is a significant consideration in the design of the Lopi 028-S-75-2. The unit features an intuitive control panel, ensuring straightforward operation. Users can easily adjust settings to match their specific heating needs, providing flexibility and convenience.

Safety features are also a priority with the Lopi 028-S-75-2. It is equipped with built-in safeguards to prevent overheating and ensure safe operation. This gives homeowners peace of mind, knowing that they have a reliable and secure heating source.

Overall, the Lopi 028-S-75-2 combines efficiency, advanced technology, and user-friendly features, making it an excellent choice for anyone looking to invest in a quality heating solution. Whether used in a cozy living room or a spacious family area, this model promises to deliver consistent warmth throughout the winter. Its commitment to performance and sustainability sets it apart in the competitive market of home heating systems.