![](/images/new-backgrounds/1053328/5332873x1.webp)
Optional Equipment (for qualified installers only) | 37 |
3Follow the directions below to replace the orifices.
b
Use a 1/2” open end wrench to unscrew both orifices.
a
Front Orifice
c
Slide the air shutters all
the way to the left.
Rear Orifice
Manifold
1/2" Wrench
Front Burner
Orifice
Rear Burner
Orifice
Apply thread sealant to the LP orifices prior to installation. Use the chart below to identify the correct orifices.
5/16”
Look here for the orifice identification
d
Screw the LP orifice in so the
orifice shoulder protrudes 5/16”
(indicating full insertion).
Manifold
LP NG
Front #55 #46
Rear #55 #44
4Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice
a | Lift the pilot hood | |
off the pilot | ||
| ||
| assembly. |
c | Remove the orifice and replace with the LP orifice. Screw the | |
orifice all the way in and replace the pilot hood. | ||
| ||
| Orifice Identification: |
b Use a hex wrench to unscrew the orifice.
5/32" Hex
NOTE: when
35
LP (Propane) Orifice
35
NG (Natural Gas) Orifice
62
© Travis Industries | 4060111 |