Installation (for qualified installers only)

7

Installation Warnings

Failure to follow all of the requirements may result in property damage, bodily injury, or even death.

This heater must be installed by a qualified installer who has gone through a training program for the installation of direct vent gas appliances.

This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI Z223.1 and NFPA 54(88).

In Manufactured or Mobile Homes must conform with Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or, when such a standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1. This appliance may be installed in Manufactured Housing only after the home is site located.

The heater is designed to operate on natural gas, or propane (LP).

All exhaust gases must be vented outside the structure of the living-area. Combustion air is drawn from outside the living-area structure.

Notify your insurance company before hooking up this heater.

The requirements listed below are divided into sections. All requirements must be met simultaneously. The order of installation is not rigid – the qualified installer should follow the procedure best suited for the installation.

Packing List

Top Convection Deflector (with screws)

Glass Latch Key (to un-latch glass frame)

Propane Conversion Kit

"Fireplace Altered" tag (attach to the fireplace)

Log Set

FPX Face Brackets (see pg. 11 for details)

Additional Items Required

Faceplate

6-5/8" to 3" & 4" Co-Linear Adapter - with flashing (Travis part # 98900124)

3" and 4" Diameter Gas Liner

Direct Vent Cap (Simpson Duravent Part # 991)

Gas Line Equipment (shutoff valve, pipe, etc.)

Items Packed with the Face

Face with attachment hardware and cove covers (if necessary)

Face Installation Instructions

Order of Installation

1Install the Top Convection Deflector (see page 8).

2If the heater is to use propane, install the propane conversion kit (see page 36).

3 Install gas line into the fireplace (do not connect to unit).

4 Position the heater.

5 Connect the gas line and gas vent to the appliance.

6 Install the optional surround panels and trim. Attach the on/off switch.

7 Follow the instructions under "Finalizing the Installation" on page 24.

© Travis Industries

4060111

100-01174

Page 7
Image 7
Lopi DVL Insert EF II owner manual Installation for qualified installers only

DVL Insert EF II specifications

The Lopi DVL Insert EF II is a remarkable heating solution that combines advanced technology with elegant design. As a part of Lopi’s prestigious line of gas inserts, the DVL Insert EF II is specifically engineered to provide efficient and reliable heating for homeowners. With an array of features, it stands out as an optimal choice for those looking to enhance their living space while maintaining energy efficiency.

One of the main features of the DVL Insert EF II is its exceptional heating efficiency. This insert is designed to provide a high heat output while minimizing energy consumption. With an impressive thermal efficiency rating, it significantly reduces heating costs and ensures that your home remains warm and inviting during the colder months. The insert is capable of heating areas up to 1,800 square feet, making it ideal for both large and small rooms.

The DVL Insert EF II boasts an advanced direct vent technology, which allows for efficient combustion while maintaining indoor air quality. This technology facilitates the intake of external air for combustion, ensuring that exhaust gases are safely vented outside, hence creating a clean and safe environment indoors. Additionally, this direct vent system enables flexible installation options, making it adaptable to various home layouts.

Another significant characteristic of the DVL Insert EF II is its impressive design. The insert features a contemporary aesthetic with clean lines and large viewing glass, allowing for an unobstructed view of the flame. The realistic flame effects and ember bed create a warm ambiance, making it a focal point in any room. Homeowners can also choose from various finishes and decorative options, ensuring that the insert complements their home decor.

Equipped with user-friendly controls, the DVL Insert EF II allows for easy adjustment of flame height and heat output. The intuitive remote control provides added convenience, enabling users to manage their comfort with just the touch of a button. Additionally, the insert is designed for easy maintenance, featuring removable components that simplify cleaning and upkeep.

In summary, the Lopi DVL Insert EF II exemplifies efficiency, elegance, and innovation. With its high thermal efficiency, direct vent technology, and stylish design, this gas insert is an excellent investment for any home. It not only provides warmth and comfort but also enhances the aesthetic appeal of your living space while promoting energy efficiency. Experience the warmth of the Lopi DVL Insert EF II and transform your home into a cozy retreat.