20 | Operating Your Appliance |
Opening the Doors
Typically the doors are only opened to start the fire. Use the Loading Lid to
Open the bypass first (this prevents smoke from entering the room).
A door latch tool is included for operation when the door latch is hot. Hang the tool on the air control when not in use.
Open the latch. | Swing the | |
doors open. | ||
|
WARNING: Do not swing the doors past 90°. This may cause the doors to strike the body of the stove and cause damage.
NOTE: When closing the doors, close the left door first. Then shut the right door and tighten the latch.
The door becomes hot during use. Use a glove to open the door if the handle is hot.
To prevent smoke from entering the room, open the bypass before opening the door (see following page for directions). You can also open the door a small amount and let air enter the firebox.
© Travis Industries | 4060802 |
