Display Modes

Display Modes

Initial Loading Sequence

The unit will automatically begin loading when power is connected to the DVR.

1.The DVR will perform a Firmware check. During the loading sequence, the version of Hardware and Mode (NTSC or PAL) will be displayed.

2.Once the Firmware check is completed, the DVR will check the Hard Drive. If a new drive has been installed, the system will prompt to format the new drive.

3.The unit will initially load to a split screen view, displaying all 4 cameras with Camera Names and the Date and Time. If a camera cannot be displayed, a V-LOSS message appears instead of an image.

NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be detected by the system.

If you choose to FORMAT a drive in this way, the drive will no longer be readable by a regular PC without using the VIEWER software included on the CD provided with this unit

Press the ◄ & ► Keys to format, or press the  (Menu) button to cancel.

1

DVR V1-03 ENNTSC

2

Checking HDD …ST3500630AVStandalone

3

2007/10/10 01:02:03

CH1 CH2

CH3 CH4

V-LOSS

Checking HDD …

HDD NEEDS TO FORMAT ALL DATA WILL BE LOST(◄►) FORMAT / () CANCEL

14