System Menu

Record Schedule Menu

The Record Schedule controls the Recording Type per hour for 24 hours (full day) for both Individual Camera and QUAD recording types. The Available Recording Types include:

•T : Continuous (Schedule*) Recording (The DVR is constantly recording on all channels, based on individual camera settings).

•M : Motion Recording (The DVR only records when Motion is detected).

•- :Recording is OFF

 

 

RECORD SCHEDULE

 

 

+ - - -

- -

- - - -

- - -

- - -

-TTTTTTTT- -

+

 

0

3

6

9

12

15

18

21

(▲▼): SELECT (◄►): SET ():EXIT

*NOTE: To configure the DVR for Scheduled Recording, set the Record Schedule to the Continuous Recording Type for the desired times (i.e. to set the DVR to begin recording from 3pm ~ 10pm, set the Record Schedule to T for all time blocks between 15hr~20hr as shown above).

Motion Setup Menu

The Motion Setup controls the Motion Detection sensitivity for each camera. The sensitivity ranges from 0 (off) ~ 9 (high sensitivity detection).

NOTE: To enable Motion Detection Recording, Set the Record Schedule Type to ‘M’ for the desired time block(s).

MOTION SETUP

 

CHANNEL 1 SENSITIVITY

0

CHANNEL 2 SENSITIVITY

5

CHANNEL 3 SENSITIVITY

6

CHANNEL 4 SENSITIVITY

9

(▲▼): SELECT (◄►): SET ():EXIT

Hard Drive Setup Menu

The hard drive setup controls the installed hard drive (if included).

•OVERWRITE ENABLED: Sets the Hard Drive Overwrite to YES or NO. If set to YES, the drive will overwrite older video once full.

•MASTER HDD SIZE: Displays the size of the installed Hard Drive (in MB). This is a display only, and cannot be changed in the menu.

•MASTER HDD USED: Displays the amount of the Drive space used (in MB). The percentage is also displayed

(%). This is a display only, and cannot be changed in the menu.

HARD DRIVE SETUP

OVERWRITE ENABLED

NO

MASTER HDD SIZE

###### MB

MASTER HDD USED

# MB #%

MASTER HDD FORMAT

 

(▲▼): SELECT (◄►): SET ():EXIT

20