STEP 2 - SET UP DVR PC VIEWER SOFTWARE
Time | Hardware | Skills - Intermediate | |
Under 30 Minutes* |
| Computer & | Plug & Play connectors, |
* Installation time may vary | Router* | On screen set up | |
based on application |
| * Minimum System Requirement: Windows XP, Pentium IV, 256MB Ram (512MB | |
|
| Recommended), 200MB Storage, Internet, DSL or Cable Modem | |
1 | 2 |
3
Computer - not included
DVR PC Viewer Software:
The PC Viewer software (included with the DVR) allows the Video Data from the DVR to be viewed using a USB link to a PC. Video saved to the PC Hard Drive (from the DVR) is written as a *.MYS file format (can only be read using the PC Viewer Software) or as a *.AVI file (can be viewed on Windows Media Player - Video CODEC is not included).
Other end to your 
computer’s USB
drive
Connecting the DVR:
1.Make sure that the power cable for the DVR is disconnected.
2.Use the provided USB Cable (Male to Male). Connect one end to the front USB Port on the DVR, and connect the other end to a PC. USB Port.
3.Connect the power cable to the DVR. The PC should automatically detect the DVR as a New USB Device and install the Hardware.
4.Launch the PC Viewer Application. The software will automatically detect the DVR, and launch the “PC Viewer Storage Device Detection” window.
Starting the PC Viewer Application:
To run the PC Viewer Application, launch the PCViewer_V3.8_EN.exe file from the included
• If the DVR is detected, the application will load and prompt the user |
to begin playing the most recent recorded video (Recent Position |
dialogue window). |
product support
It’s all on the Web
www.lorexcctv.com
For detailed setup information, please refer to your User’s Manual. For additional
information, please visit our website www.lorexcctv.com/support
Email Support: support@lorexcorp.com
Toll Free Technical Support - North America:
Toll Free Technical Support - International (outside of North America):
Lorex International Website - www.lorexinternational.com
• If the DVR is not detected, the application will open an error |
dialogue window (Detection Error dialogue window) indicating |
the storage device is not found, and will launch the MYS |
Player Window. |
Congratulations! You have completed |
Step 2 successfully. You can now |
view DVR images on your PC. |
L104 Series Quick Start Guide_R1 Page | www.lorexcctv.com |
|
|
