LOREX Technology QDR-TELS manual DVR PC Power Pin Cable

NOTES:

In order for the QDR-TELS to operate properly, the VistaPro 4 and I/O Alarm Board must already be installed in the PC with particular attention to the items below:

1.The VistaPro 4 main board and I/O board have to be connected each other.(I/O board cable connector)

2.The power supply port for camera power on the VistaPro main board must be connected to the PC Power Supply. (Power supply cable)

3.The Socket for ‘PC Power On Control’ of the VistaPro I/O Alarm board must be connected to the Power Pin on the PC main-board (PC Power Pin connection cable -red cable).The other side of this cable must be connected with the Power Switch connection cable on the front of PC case.

DVR PC Power Pin Cable

DVR PC Power Pin Cable

PC Main-board

PC Main-board

DVR PC Power Pin

DVR PC Power Pin

Cable

Cable

Power Switch

Power Switch cable connector cable connector from PC Front case from PC Front case

For further instructions related to the installation of the VistaPro 4 and I/O Alarm Block, please refer to the VistaPro 4 Installation and User Manual.