MODEL SG630
Imitation Indoor / Outdoor Surveillance Camera
English Version 1.0
THIS PACKAGE CONTAINS:
1 x Imitation Camera with Stand
1 x Screw and Anchor Pack
FEATURES
• Realistic Imitation CCTV Surveillance Camera
• Uses Genuine Metal Camera Body
• Ideal For Indoor/Outdoor Use
• Metal Wall Mount Bracket, Sunshield and Cables included
Imitation Camera with Stand | Screw & Anchor Pack |
The Lorex Imitation Surveillance Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with imitation lens and actual CCTV Housing. Mount the Imitation Surveillance Camera in a visible area on a wall to deter possible thieves and intruders.
INSTALLING THE IMITATION SURVEILLANCE CAMERA
1. Installing the Camera Base Bracket: | 1. |
|
•Attach the Camera Base Bracket to the Camera by screwing it firmly into place with a single large screw. Use the screw provided in the hardware pack.
Camera Base
2. Adjusting the Camera Base Bracket:
•Once the Camera Base Bracket has been attached to the camera, tilt it from the “L” position to the square position shown in the diagram.
NOTE: You may need to loosen the side screws before adjusting the Base Bracket. You may wish to leave the screws loose to assist in aiming the camera.
3. Installing the Camera Stand:
NOTE: While mounting the Camera Stand to the wall, use the packaging material to protect the hanging camera from scratches or damage.
•Drill 1 inch holes in the marked positions for the 3 screw holes.
•If necessary, insert the supplied drywall anchors into the screw holes.
•Insert a 1 inch screw (provided) through each of the three (3) screw holes in the Camera Stand and into the mounting surface, then tighten the screws.
2.
3.
Camera Stand | Ceiling / Wall |
