CONTROLS & FUNCTIONS
WIRELESS RECEIVER
3 | TOP VIEW | REAR VIEW |
|
4
5 | 6 | 7 | 8 |
2 1
9 | 10 |
BOTTOM VIEW
1.Auto/Manual Button – Used to activate/deactivate auto sequencing
2.Channel Selector Button – Used to manually switch channels from
3.LED Channel Indicators – Indicator light shows selected channel
4.2.4 GHz Antenna – High gain dipole antenna receives audio and video signal from the wireless camera
5.Video Output Jack (Yellow) – RCA jack for video output connector (when using RCA connector)
6.Audio Output Jacks L (White) & R (Red) – RCA jacks for audio output connector (when using RCA connector)
7.RF Out Jack (To TV) – Connects the receiver to a TV using the supplied coaxial cable (alternative to RCA cable connection).
8.DC IN Jack – Connects to the power supply of the receiver
9.ON/OFF Power Switch – Ensure this switch is set to OFF before
plugging the system into an electrical outlet
10.Channel 3/4 Selector Switch – Used to view picture on television when using coaxial cable (preset to channel 3)
4
