28
6. Highlight YES and press ENTER. Press EXIT repeatedly to return to
the main display.
NMEA 2000 Alarms When you set a NMEA 2000 Alarm for a pressure sensor, a pop-up
window will appear and an alarm will sound when pressure exceeds or
falls below a preset PSI level of your choosing.
To turn on/off NMEA 2000 Alarm:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Highlight NMEA 2000 ALARMS and press ENTER.
3. Highlight FLUID LEVEL DEVICE and press ENTER. Select the desired
pressure sensor and press ENTER.
4. Highlight the ENABLED box next to the desired alarm (High Pressure
or Low Pressure) and press ENTER to turn on the alarm. When the
alarm is on an "X" will be placed in the Enabled Box.
5. To set the PSI level for an alarm, press → to highlight VALUE and
press ENT.
6. Use the arrow keys to input the desired PSI and press ENTER.
Repeat Steps 3-4 to set the other alarm.
7. Highlight SET CONFIGURATION and press ENTER to finalize alarm
settings. Press EXIT repeatedly to get back to the main display.
NOTE:
To turn off (uncheck) an alarm, select its ENABLED BOX and press
ENTER. Highlight the SET CONFIGURATION button and press ENTER.
Alarm Status Tab
The Alarm Status tab is the second tab at the top of the NMEA 2000
Alarms page. When an alarm has been set for a device, the alarm and
its current status will be shown on the Alarm Status window.
To view Alarm Status:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Select NMEA 2000 ALARMS and press ENTER.
3. Highlight the Alarm Status tab.
4. Press EXIT repeatedly to return to the main display.