Lowrance electronic LDT-3001 manual 234567, Mounting

The LDT-3001 is a digital temperature meter. It's operation is completely automatic. There are no controls. This unit fits in a standard 2 1/8" (54 mm) hole used by most marine equipment manufacturers.

Mounting

This unit needs at least 2 1/2" (64 mm) of space to mount on any flat panel or dash. To install the unit, also make certain there is at least 3 3/4" (95 mm) from the front of the dash to any obstruction behind the dash. Check to be sure there is room to route the power and sensor cables. The maximum usable dash thickness is 1 1/8" (28.5 mm).

234567

3 3/4" minimum

clearance

SCREW

DASH

21/2"

(64 mm)

(SQUARE

BEZEL)

1

TIGHTEN

THESE

SCREWS

2 1/8" (54 mm) HOLE

2 3/8" ( 60 mm)

(ROUND

BEZEL)