Troubleshooting

If an unexpected problem occurs while using the XV-2020, read this chapter first. It contains numerous tips for resolving problems.

*If a message appears during operation, consult the following section Error Messages (p. 116).

Problems when using the XV-2020

No sound

Is the VOLUME lowered?

Check the VOLUME knob, and the volume settings on the connected amp/mixer, etc.

Have connections been made correctly?

If there is sound in the headphones, it is possible that the connection cables are broken, or that the amp or mixer is malfunctioning. Check the connection cables and other devices once again.

Is the Patch mode selected?

When song data is played back in the Patch mode, only the sound of a single Part is played. Change to the Performance mode, then play the song data. (p. 39)

Is the MIDI receive channel correct?

Make sure that the MIDI transmit channel of the connected device matches the receive channel of the XV- 2020 (p. 35).

Are the Tone, Patch and Part level settings excessively low?

Check the level settings of each Tone, Patch and each Part. (Patch p. 46, Part p. 72)

Are Tones or Parts turned off?

Check the on/off settings of each Tone and each Part. (Tone p. 46, Part p. 71)

Are the key range settings correct?

Check the key range settings of each Tone and each Part. (Tone p. 49, Part p. 73)

Has the volume been lowered by volume/expression messages received from an external device?

The volume will return to normal when the power is turned on once again.

Are the effect settings correct?

Check settings such as Effect On/Off (p. 76), and Effect Balance and Level (p. 76).

Are the output destination settings correct?

Check the Output Assign and MFX Output Assign settings. (p. 80)

Is MIDI-USB Thru turned on?

Turn the MIDI-USB Thru parameter off, or turn on the MIDI Thru parameter in the connected computer (p. 95).

Is the specified Wave Expansion Board properly installed?

EXP-A (B) patches and rhythm sets cannot be selected unless the Wave Expansion Board is installed in the designated slot. (p. 105)

Pitch is wrong

Is the Master Tune setting correct?

Check the setting. (p. 94)

Is Scale Tune selected?

Check the setting. (p. 51, p. 75)

Are the pitch settings for each Tone and each Part correct?

Check each setting. (Tone p. 46, Part p. 72)

Have pitch bend messages received from an external device caused the pitch to “stick”?

The pitch will return to normal when the power is turned on.

Effects do not apply

Are MFX, CHORUS, and REVERB turned off?

Check the setting. (p. 76)

Are the various effect settings correct?

If the send levels to each effect are at 0, effects will not apply. Check each setting. (p. 78, p. 79, p. 80)

110

Page 110
Image 110
Kenwood XV-2020 owner manual Troubleshooting, Problems when using, No sound, Pitch is wrong, Effects do not apply

XV-2020 specifications

The Kenwood XV-2020 is a distinguished model in the realm of high-fidelity audio equipment, offering a blend of vintage charm and modern technology. Renowned for its powerful performance and exquisite sound quality, the XV-2020 appeals to audiophiles and casual listeners alike, making it a sought-after choice in the used market.

At the heart of the Kenwood XV-2020 is its robust amplifier section, delivering a significant output power that allows it to drive a variety of speakers effortlessly. With a power rating typically around 50 watts per channel (into 8 ohms), this receiver provides a rich, dynamic sound suitable for a wide range of musical genres. The amplifier is designed with a low total harmonic distortion, ensuring that the audio output remains clean and free from undesirable artifacts, even at high volumes.

The XV-2020 features a multi-source input configuration, allowing users to connect various audio sources such as CD players, turntables, and cassette decks. This versatility is complemented by its built-in phono stage, which means vinyl enthusiasts can connect their turntables directly without needing a separate preamp. The receiver also supports AM/FM radio, featuring a reliable tuner section that ensures excellent reception, allowing users to enjoy their favorite radio stations with clarity.

One of the standout features of the Kenwood XV-2020 is its tone control options. Users can fine-tune their listening experience with adjustable bass, midrange, and treble controls. This capability allows for customization according to individual preferences or room acoustics, making it easier to achieve the ideal sound profile.

Additionally, the XV-2020 incorporates a decoder for various surround sound formats, enhancing the listening experience for movies and music encoded in surround formats. This feature reflects Kenwood’s commitment to evolving audio technology, providing users with an immersive experience that traditional stereo systems often lack.

The build quality of the XV-2020 is another characteristic that sets it apart. Housed in a sturdy chassis with a minimalist aesthetic, it is not only functional but also an attractive piece of equipment that fits well in any home audio setup. With its user-friendly interface and comprehensive features, the Kenwood XV-2020 remains a popular choice for those looking to experience rich audio performance without compromising on style. Its combination of power, flexibility, and classic design solidifies its status as a beloved component in the world of audio receivers.