Kenwood XV-2020 owner manual Enhancer Flanger

Using the XV-2020 Effects

33: ENHANCER -> FLANGER

			Balance D
L in	Enhancer				L out
		Mix
			Feedback
				Balance W
			Flanger	Balance W
R in					R out
	Enhancer
		Mix	Balance D
Parameter		Value	Description
Enhancer Sens #		0-127	Sensitivity of the enhancer
Enhancer Mix		0-127	Level of the overtones generated
			by the enhancer
Flg Rate		0.05-10.00 Hz	Frequency of modulation
Flg Depth		0-127	Depth of modulation
Flg Feedback		-98-+98 %	Adjusts the amount of the
			flanger sound that’s fed back
			into the effect. Negative (-) set-
			tings invert the phase.
Flg Delay		0.0-100.0 ms	Adjusts the time until the flanger
			is heard.
Flg Balance #		D100:0W-	Adjusts the volume balance be-
		D0:100W	tween the sound sent through
			the flanger (W) and the sound
			that’s not sent through the
			flanger (D).
Level		0-127	Output level
34: ENHANCER -> DELAY
L in	Enhancer				L out
		Mix	Balance D
				Balance W
			Delay
				Balance W
			Feedback
R in	Enhancer				R out
		Mix	Balance D
Parameter		Value	Description
Enhancer Sens #		0-127	Sensitivity of the enhancer
Enhancer Mix		0-127	Level of the overtones generat-
			ed by the enhancer
Delay Time		0.0-500.0 ms	Adjusts the time until the delay
			is heard.
Dly Feedback		-98-+98 %	Adjusts the amount of the de-
			lay sound that’s fed back into
			the effect. Negative (-) settings
			will invert the phase.
Dly HF Damp		200-8000 Hz,	Adjusts the frequency above
		BYPASS	which sound fed back to the ef-
			fect is filtered out. If you don’t
			want to filter out any high fre-
			quencies, set this parameter to
			BYPASS.
Dly Balance #		D100:0W-	Adjusts the volume balance be-
		D0:100W	tween the sound sent through
			the delay (W) and the sound
			that’s not sent through the de-
			lay (D).
Level		0-127	Output level

35: CHORUS -> DELAY

		Balance D
L in											L out
		Balance W						Balance D
										Balance W
		Chorus						Delay		Balance W
		Balance W
								Feedback
R in											R out
		Balance D						Balance D
Parameter					Value			Description
Cho Rate					0.05-10.00 Hz			Frequency of modulation
Cho Depth				0-127				Depth of modulation
Cho Delay					0.0-100.0 ms			Adjusts the time until the cho-
								rus is heard.
Cho Balance #					D100:0W-			Volume balance between the
					D0:100W			direct sound (D) and the cho-
								rus sound (W)
Delay Time					0.0-500.0 ms			Adjusts the time until the delay
								is heard.
Dly Feedback				-98-+98 %				Adjusts the amount of the de-
								lay sound that’s fed back into
								the effect. Negative (-) settings
								invert the phase.
Dly HF Damp					200-8000 Hz,			Adjusts the frequency above
					BYPASS			which sound fed back to the ef-
								fect is filtered out. If you do not
								want to filter out any the high
								frequencies, set this parameter
								to BYPASS.
Dly Balance #					D100:0W-			Adjusts the volume balance be-
					D0:100W			tween the sound sent through
								the delay (W) and the sound
								that’s not sent through the de-
								lay (D).
Level				0-127				Output level
36: FLANGER -> DELAY
	Balance D
L in											L out
		Feedback						Balance D
						Balance W				Balance W
	Flanger					Balance W			Delay	Balance W
								Feedback
R in											R out
	Balance D							Balance D
Parameter				Value			Description
Flg Rate				0.05-10.00 Hz			Frequency of modulation
Flg Depth			0-127				Depth of modulation
Flg Feedback			-98-+98 %				Adjusts the amount of the flanger
							sound that’s fed back into the ef-
							fect. Negative (-) settings invert the
							phase.
Flg Delay				0.0-100.0 ms			Adjusts the time until the flanger is
							heard.
Flg Balance #				D100:0W-			Volume balance between the direct
				D0:100W			sound (D) and the flanger sound
							(W)
Delay Time				0.0-500.0 ms			Adjusts the time until the delay
							sound is heard.
Dly Feedback			-98-+98 %				Adjusts the amount of the delay
							sound that’s fed back into the ef-
							fect. Negative (-) settings invert the
							phase.
Dly HF Damp				200-8000 Hz,			Adjusts the frequency above
				BYPASS			which sound fed back to the effect
							is filtered out. If you do not want to
							filter out any high frequencies, set
							this parameter to BYPASS.
Dly Balance #				D100:0W-			Adjusts the volume balance be-
				D0:100W			tween the sound sent through the
							delay (W) and the sound that’s not
							sent through the delay (D).
Level			0-127				Output level

90