Installing a Wave Expansion Board

Two Wave Expansion Boards (SRX series; sold separately) can be installed in the XV-2020.

Waveform data, patches and rhythm sets are stored on the Wave Expansion Board, so you can increase the number of available sounds by installing the board in the XV-2020.

Installing a Wave Expansion Board increases the patches and drum sets for Parts, but the number of Parts doesn’t change.

The Wave Expansion Board can be installed by removing the top cover.

Cautions When Installing an Wave Expansion Board

To avoid the risk of damage to internal components that can be caused by static electricity, please carefully observe the following whenever you handle the board.

Before you touch the board, always first grasp a metal object (such as a water pipe), so you are sure that any static electricity you might have been carrying has been discharged.

When handling the board, grasp it only by its edges. Avoid touching any of the electronic components or connectors.

Save the bag in which the board was originally shipped, and put the board back into it whenever you need to store or transport it.

Do not touch any of the printed circuit pathways or connection terminals.

Never use excessive force when installing a circuit board. If it doesn’t fit properly on the first attempt, remove the board and try again.

When circuit board installation is complete, double-check your work.

Install only the specified board, and remove only the specified screws.

Be careful not to cut your hands on the opening for installing the board.

Expansion Board

1.Before installing the Wave Expansion Board, switch off the power to the XV-2020 and any connected equipment.

2.Detach the cover on the upper portion of the XV-2020.

Loosen the screw on the upper portion of the cover.

fig.1-03a.e

Driver

3.Position the board holders so they are oriented.

fig.Install2.e

Holder

4.Insert the connector for the Wave Expansion Board into the connector on the unit, and at the same time, fit the board

holders into the holes.

fig.Install3.e

Holder

Connector

5.Use the tool supplied with the Wave Expansion Board to rotate the board holders to LOCK, securing the Wave

Expansion Board in place.

fig.Install4

LOCK

6.Use the (specified) screws you removed in step 2 to reattach the cover.

This completes the installation of the Wave Expansion Board. Next, make sure the board is installed correctly.

106

Page 106
Image 106
Kenwood XV-2020 owner manual Installing a Wave Expansion Board, 106

XV-2020 specifications

The Kenwood XV-2020 is a distinguished model in the realm of high-fidelity audio equipment, offering a blend of vintage charm and modern technology. Renowned for its powerful performance and exquisite sound quality, the XV-2020 appeals to audiophiles and casual listeners alike, making it a sought-after choice in the used market.

At the heart of the Kenwood XV-2020 is its robust amplifier section, delivering a significant output power that allows it to drive a variety of speakers effortlessly. With a power rating typically around 50 watts per channel (into 8 ohms), this receiver provides a rich, dynamic sound suitable for a wide range of musical genres. The amplifier is designed with a low total harmonic distortion, ensuring that the audio output remains clean and free from undesirable artifacts, even at high volumes.

The XV-2020 features a multi-source input configuration, allowing users to connect various audio sources such as CD players, turntables, and cassette decks. This versatility is complemented by its built-in phono stage, which means vinyl enthusiasts can connect their turntables directly without needing a separate preamp. The receiver also supports AM/FM radio, featuring a reliable tuner section that ensures excellent reception, allowing users to enjoy their favorite radio stations with clarity.

One of the standout features of the Kenwood XV-2020 is its tone control options. Users can fine-tune their listening experience with adjustable bass, midrange, and treble controls. This capability allows for customization according to individual preferences or room acoustics, making it easier to achieve the ideal sound profile.

Additionally, the XV-2020 incorporates a decoder for various surround sound formats, enhancing the listening experience for movies and music encoded in surround formats. This feature reflects Kenwood’s commitment to evolving audio technology, providing users with an immersive experience that traditional stereo systems often lack.

The build quality of the XV-2020 is another characteristic that sets it apart. Housed in a sturdy chassis with a minimalist aesthetic, it is not only functional but also an attractive piece of equipment that fits well in any home audio setup. With its user-friendly interface and comprehensive features, the Kenwood XV-2020 remains a popular choice for those looking to experience rich audio performance without compromising on style. Its combination of power, flexibility, and classic design solidifies its status as a beloved component in the world of audio receivers.