Kenwood XV-2020 Pan Kf, Random PAN Depth, ALT PAN Depth, Send Level DRY, Send Level CHO

Creating a Patch

Parameter	Value	Description
PAN	L64–63R	Specifies the stereo position of the Tone. L64 places the Tone hard left, 0 puts it dead-
(Tone Pan)		center and 63R pans it hard right.

*The overall panning of the entire Patch is set by the Patch Pan parameter (PATCH COM- MON p. 46), shifting the Tone Pan values of its individual Tones leftward or rightward by the selected amount.

PAN KF	-100–+100	Use this parameter when you want each note’s keyboard position to affect its stereo
(Tone Pan Key follow)		location. Higher settings cause a greater shifting of the Tone’s original pan position as
		you move further away from Middle C (C4), where the original stereo TVA Pan value
		remains in effect. Positive (+) settings cause notes above Middle C to be panned right-
		ward. Negative (-) settings cause them to be panned leftward.

Pan	R						+100
							+50
	o						0
							-50
	L						-100	Key
	C1	C2	C3	C4	C5	C6	C7

RANDOM PAN DEPTH	0–63	Use this parameter to activate random panning, note-by-note. Higher values result in
(Tone Random Pan Depth)		more extreme fluctuations in the Tone’s stereo placement.
ALT PAN DEPTH	L63–63R	This setting causes panning to be alternated between left and right each time a key is
(Tone Alternate Pan Depth)		pressed. Higher values result in a greater left/right width. You can select the stereo
		placement of the first key using this parameter—its opposite is used for the second
		note, and so on back and forth. If you want to alternate the pan position of two Tones,
		set them to the exact opposite L and R settings.

TVA ENVELOPE	Level	T1	T2	T3	T4
This specifies the manner in which keyboard ve-
			L1
locity affects the times of the TVA envelope.			L2
					L3
					Time

		key is pressed	key is released
ENV TIME KF	-100–+100	Use this parameter when you want a note’s keyboard position to affect times T2–T4 of
(TVA Envelope Time Key follow)		the TVA envelope. Higher settings change the times by a greater amount as you move
		away from Middle C (C4)—at Middle C, the original T1–T4 settings are in effect. Pos-
		itive (+) settings cause the times to shorten as you play above Middle C. Negative (-)
		settings cause the times to lengthen as you play above Middle C. (p. 55)
ENV T1 SENS	-63–+63	Use this parameter when you want keyboard playing dynamics to affect T1 (Time 1)
(TVA Envelope Time 1 Velocity		of the TVA envelope. If you want T1 to be sped up for strongly played notes, set this
Sensitivity)		parameter to a positive (+) value. If you want it to be slowed down, set this to a nega-
		tive (-) value.
ENV T4 SENS	-63–+63	se this parameter when you want key release speed to affect T4 (Time 4) of the TVA
(TVA Envelope Time 4 Velocity		envelope. If you want T4 to be sped up for quickly released notes, set this parameter
Sensitivity)		to a positive (+) value. If you want it to be slowed down, set this to a negative (-) value.
ENV T1–T4	0–127	Specify the TVA envelope times. Higher settings lengthen the time until the next vol-
(TVA Envelope Time 1–4)		ume level is reached. (For example, T2 is the time over which L1 changes to L2.)
ENV L1–L3	0–127	Specify the TVA envelope levels. These settings specify how the volume changes at
(TVA Envelope Level 1–3)		each point, relative to the standard volume.
EFFECTS
SEND LEVEL DRY
(Dry Send Level)
SEND LEVEL CHO
(Tone Chorus Send Level)	Refer to p. 78.
SEND LEVEL REV
(Tone Reverb Send Level)
OUTPUT ASSIGN
(Tone Output Assign)

60