Kenwood XV-2020 owner manual Triple TAP Delay

19: TRIPLE TAP DELAY

Produces three delay sounds; center, left and right.

fig.02-019m

Balance D

L in			2-Band	L out
			EQ
	Left Tap		Balance W
Triple Tap Delay		Center Tap
Feedback	Right Tap		Balance W
R in			2-Band	R out
			EQ
		Balance D

Parameter	Value	Description
Delay C	200-1000	Adjusts the time until the delay sound is
Delay L	ms, note *1	heard.
Delay R
Feedback #	-98-+98 %	Adjusts the amount of the delay sound that’s
		fed back into the effect. Negative (-) settings
		invert the phase.
HF Damp	200-8000	Adjusts the frequency above which sound
	Hz, BYPASS	fed back to the effect is filtered out. If you do
		not want to filter out any high frequencies,
		set this parameter to BYPASS.
Delay C Level	0-127	Volume of each delay
Delay L Level
Delay R Level
Low Gain	-15-+15 dB	Gain of the low frequency range
High Gain	-15-+15 dB	Gain of the high frequency range
Balance #	D100:0W-	Volume balance between the direct sound
	D0:100W	(D) and the delay sound (W)
Level	0-127	Output level

20: QUADRUPLE TAP DELAY

This effect has four delays.

fig.02-020am

								Balance D
L in									L out
	Feedback					Delay 1		Balance W
							Delay 2
			Quadruple Tap Delay
							Delay 3
								Balance W
						Delay 4
R in									R out
								Balance D
fig.02-020bm
2		3
1		4
L				R	delay
Stereo location of each
Parameter				Value			Description
Delay 1				200-1000			Adjusts the time until the delay sound is
Delay 2				ms, note *1			heard.
Delay 3
Delay 4
Feedback #				-98-+98 %			Adjusts the amount of the delay sound that’s
							fed back into the effect. Negative (-) settings
							invert the phase.
HF Damp				200-8000			Adjusts the frequency above which sound
				Hz, BYPASS			fed back to the effect is filtered out. If you do
							not want to filter out any high frequencies,
							set this parameter to BYPASS.
Delay Level 1				0-127			Volume of each delay
Delay Level 2
Delay Level 3
Delay Level 4
Balance #				D100:0W-			Volume balance between the direct sound
				D0:100W			(D) and the delay sound (W)
Level				0-127			Output level

Using the XV-2020 Effects

21: TIME CONTROL DELAY

This effect allows you to use a specified controller — the controller selected in EFX Control Source — to control the delay time and pitch in realtime. Lengthening the delay lowers the pitch, and shortening it raises the pitch.

fig.02-021m

L in					2-Band	L out
		Balance D			EQ
					Balance W
	Time Control Delay				Balance W
		Feedback
R in					2-Band	R out
		Balance D			EQ
Parameter		Value	Description
Delay #		200-1000 ms	Adjusts the time until the delay is heard.
Acceleration		0-15	Adjusts the time over which the Delay
			Time changes from the current setting to
			a specified new setting.
				The rate of change for the Delay Time
				directly affects the rate of pitch change.
Feedback #		-98-+98 %	Adjusts the amount of the delay that’s
			fed back into the effect. Negative (-) set-
			tings invert the phase.
HF Damp		200-8000 Hz,	Adjusts the frequency above which
		BYPASS	sound fed back to the effect is filtered
			out. If you do not want to filter out any
			high frequencies, set this parameter to
			BYPASS.
Low Gain		-15-+15 dB	Gain of the low frequency range
High Gain		-15-+15 dB	Gain of the high frequency range
Balance		D100:0W-	Volume balance between the direct
		D0:100W	sound (D) and the delay sound (W)
Level		0-127	Output level
Pan		L64-63R	Stereo location of the delay

22: 2 VOICE PITCH SHIFTER

Shifts the pitch of the original sound. This 2-voice pitch shifter has two pitch shifters, and can add two pitch-shifted versions of the original sound.

fig.02-022m

					Balance D
L in							L out
		Level Balance A			PanA L
						Balance W
				PanA R
	2Voice Pitch Shifter
				PanB L
						Balance W
		Level Balance B			PanB R
R in							R out
					Balance D
Parameter			Value		Description			2020
Coarse A #1			-24-+12 semi		Adjusts the pitch of Pitch Shift A in
					semitone steps.			-
								theXV Effects
Fine A #1			-100-+100 cent		Adjusts the pitch of Pitch Shift A in 2-
					cent steps.
Pre Dly A			0.0-500 ms		Adjusts the time until Pitch Shift A is			Using
					heard.
Pan A			L64-63R		Stereo location of Pitch Shift A
Coarse B #2			-24-+12 semi		Settings for Pitch Shift B
Fine B #2			-100-+100 cent		The parameters are the same as for
					Pitch Shift A.
Pre Dly B			0.0-500.0 ms
Pan B			L64-63R
Mode			1, 2, 3, 4, 5		Setting a higher value for this parame-
					ter results in a slower response, but
					steadier pitch.
Level Bal			A100:0B-		Volume balance between Pitch Shift A
			A0:100B		and Pitch Shift B
Balance			D100:0W-		Volume balance between the direct
			D0:100W		sound (D) and the pitch shifted sound
					(W)
Level			0-127		Output level

87