Kenwood XV-2020 owner manual Patch & Velocity KEY Range

Creating a Patch

PATCH & VELOCITY KEY RANGE

PATCH VELOCITY RANGE

*Parameters that can be set independently for each Tone are indicated by “#.”

Parameter	Value	Description
VELOCITY CONTROL	OFF, ON, RANDOM	Determines whether Velocity messages from a MIDI keyboard or sequenc-
(TMT Velocity Control)		er are recognized (ON), or ignored (OFF). When set to RND, the Patch’s
		constituent Tones sound randomly, regardless of any Velocity messages.
TMT CONTROL SW	OFF, ON	This setting determines whether or not the TMT is controlled by the Ma-
(TMT Control Switch)		trix Control. When TMT Velocity Control is set to OFF, turning this pa-
		rameter on and off is a simple way to switch between playing all Tones or
		controlling them with the Matrix Control, making this an effective tool for
		auditioning Tones.

		[What is a TMT?]
		With the XV-2020, you can set each Tone’s expression range, or “key
		range.” You can also change the way the Tone responds to the force, or
		“velocity,” with which a key is pressed. These settings are collectively re-
		ferred to as the TMT.
FADE LOWER#	0–127	Determines what happens to the Tone’s level when the Tone is played at
(TMT Velocity Fade Width Lower)		a velocity lower than its specified velocity range. Higher settings result in
		a more gradual change in volume. If you don’t want notes played below
		the specified velocity range to be heard at all, set this to 0.
LOWER#	1–UPPER	Sets the lowest velocity at which the Tone sounds.
(TMT Velocity Range Lower)
UPPER#	LOWER–127	Sets the highest velocity at which the Tone sounds.
(TMT Velocity Range Upper)		* It is not possible to set the Lower value higher than the Upper value, or the Up-
			per value below the Lower value.
FADE UPPER#	0–127	Determines what happens to the Tone’s level when the Tone is played at
(TMT Velocity Fade Width Upper)		a velocity greater than its specified velocity range. Higher settings result
		in a more gradual change in volume. If you don’t want notes played above
		the specified velocity range to be heard at all, set this to 0.
			Level
		1			Velocity
			Lower
				Upper
			L.Fade value	U.Fade value

PATCH KEY RANGE

*Parameters that can be set independently for each Tone are indicated by “#.”

Parameter	Value	Description
FADE LOWER#	0–127	Determines what happens to the Tone’s level when a note that’s lower than the Tone’s
(TMT Key Fade Width Lower)		specified keyboard range is played. Higher settings result in a more gradual change in
		volume. If you don’t want the Tone to sound at all when a note below the keyboard
		range is played, set this parameter to 0.
LOWER#	C-1–UPPER	Specifies the lowest note that causes the Tone to sound.
(TMT Key Range Lower)
UPPER#	LOWER–G9	Specifies the highest note that causes the Tone to sound.
(TMT Key Range Upper)		* The Lower value cannot be set to a value greater than Upper value, or vice versa.
FADE UPPER#	0–127	Determines what happens to the Tone’s level when a note that’s higher than the Tone’s
(TMT Key Fade Width Upper)		specified keyboard range is played. Higher settings result in a more gradual change in
		volume. If you don’t want the Tone to sound at all when a note above the keyboard
		range is played, set this parameter to 0.
		Level
					Key number
		0	Lower	Upper	127
			L.Fade value	U.Fade value

Creating a Patch

49