Kenwood XV-2020 owner manual When Mode is Normal, When Mode is Cross

Using the XV-2020 Effects

17: STEREO DELAY

This is a stereo delay.

When Mode is NORMAL:

	Balance D	2-Band
L in			L out
		EQ
	Delay	Balance W
	Feedback
	Feedback
		Balance W
	Delay
R in		2-Band	R out
	Balance D	EQ
When Mode is CROSS:
	Balance D	2-Band
L in			L out
		EQ
	Delay	Balance W
	Feedback
	Feedback
		Balance W
	Delay
R in		2-Band	R out
	Balance D	EQ
Parameter	Value	Description
Delay L	0.0-500.0 ms	Adjusts the time until the delay
Delay R		sound is heard.
Feedback #	-98-+98 %	Adjusts the amount of the delay
		sound that’s fed back into the effect.
		Negative (-) settings invert the
		phase.
Mode	NORMAL,	Selects the way in which delay
	CROSS	sound is fed back into the effect. (See
		the figures above.)
HF Damp	200-8000 Hz,	Adjusts the frequency above which
	BYPASS	sound fed back to the effect is fil-
		tered out. If you don’t want to filter
		out any high frequencies, set this pa-
		rameter to BYPASS.
Phase L	NORMAL,	Phase of the delay sound
Phase R	INVERT
Low Gain	-15-+15 dB	Gain of the low frequency range
High Gain	-15-+15 dB	Gain of the high frequency range
Balance #	D100:0W-	Volume balance between the direct
	D0:100W	sound (D) and the delay sound (W)
Level	0-127	Output level

18: MODULATION DELAY

Adds modulation to the delayed sound, producing an effect similar

to a flanger.

When Mode is NORMAL:

				Balance D	2-Band
L in						L out
					EQ
		Delay		Modulation	Balance W
	Feedback
	Feedback
					Balance W
		Delay		Modulation
R in					2-Band	R out
				Balance D	EQ
When Mode is CROSS:
				Balance D	2-Band
L in						L out
					EQ
		Delay		Modulation	Balance W
		Feedback
		Feedback
		Delay		Modulation	Balance W
R in					2-Band	R out
				Balance D	EQ
Parameter			Value		Description
Delay Left			0.0-500.0 ms		Adjusts the time until the delay sound
Delay Right					is heard.
Feedback			-98-+98 %		Adjusts the amount of the delay sound
					that’s fed back into the effect. Negative
					(-) settings invert the phase.
Mode			NORMAL,		Selects the way in which delay sound
			CROSS		is fed back into the effect (See the fig-
					ures above.)
HF Damp			200-8000 Hz,		Adjusts the frequency above which
			BYPASS		sound fed back to the effect is filtered
					out. If you don’t want to filter out any
					high frequencies, set this parameter to
					BYPASS.
Rate #			0.05-10.00 Hz		Frequency of modulation
Depth			0-127		Depth of modulation
Phase			0-180 deg		Spatial spread of the sound
Low Gain			-15-+15 dB		Gain of the low frequency range
High Gain			-15-+15 dB		Gain of the high frequency range
Balance #			D100:0W-		Volume balance between the direct
			D0:100W		sound (D) and the delay sound (W)
Level			0-127		Output level

86