9

Front and Rear Panel

Front Panel

fig.00-01

1. USB Connector

Use this for connecting a computer to the XV-2020 using a USB cable
(p. 13).

2. PHONES Jack

This is the jack for connecting headphones (sold separately).

* Use headphones with an impedance of 8 to 150 Ohms.

3. VOLUME Knob

This adjusts the volume level for the OUTPUT jack and the PHONES
jack. You can also check out a sound using the XV-2020 alone by
pressing the VOLUME knob (
Playing Patches (Phrase Preview)
p.
34). When in a mode other than the Patch mode, pressing the
VALUE knob while holding down the VOLUME knob switches you
to the Edit mode.

4. PART Knob

In the Patch mode, it changes the receive channel. In the
Performance mode or the GM mode, it selects the Part to which
settings are to be applied.

5. Display

Displays a variety of information about the operation being
performed.

6. MIDI Indicator

Lights up when MIDI messages are received.

7. MODE Indicators

The indicator for the currently active mode lights up.

8. VALUE Knob

This changes the setting values for parameters. Turning the knob
rapidly makes the value change in larger increments. Pressing the
knob switches the mode. Pressing the VALUE knob while holding
down the VOLUME knob switches you to the Edit mode.

9. CATEGORY/BANK Knob

Used to switch the sound selection range.
In the Edit mode, it is used to select the parameter to be set. For more
information about the CATEGORY/BANK knob’s functions in Edit
mode, refer to the EDIT PARAMETER SELECT chart on the XV-
2020’s top panel.

fig.00-01a

10. POWER Switch

Pressed to switch the power on and off.

Rear Panel

fig.00-02

1. AC Adaptor Jack

Accepts connection of the supplied AC adaptor.

2. Cord Hook

To prevent the inadvertent disruption of power to your unit (should
the plug be pulled out accidentally), and to avoid applying undue
stress to the AC adaptor jack, anchor the power cord using the cord
hook.

3. MIDI Connectors (IN, OUT, THRU)

These connectors are used to connect the XV-2020 with other devices
for sending and receiving MIDI messages.
MIDI IN: This receives information from other MIDI
instruments.
MIDI OUT: This sends information from the XV-2020.
MIDI THRU: This sends out, unaltered, information received from
MIDI IN.

4. OUTPUT Jacks (L (MONO), R)

These are for stereo (L/R) output of audio signals to an amp or a
mixer. For monaural output, connect to the left (L) jack.
Two types of jacks are provided for the OUTPUT jacks, 1/4” phone
jacks (L (MONO), R) and RCA phono jacks (L, R).
11 2 3 4 66
57 8 9 10
1 3 4
4
2