Lowrance electronic X-28 manual Display Mode, CHT 1 Chart #1, CHT 2 Chart #2

adjustable by pressing a menu key until the chart speed menu appears. Chart speed is set to maximum when the X-28 is first turned on. To decrease it, press the down arrow key. Press the up arrow key to increase the speed again. The percentage of chart speed also shows on this menu. Echoes scrolling onto the screen will also show the effects of the change. If you reach the maximum or mini- mum level, an warning tone sounds.

To stop the chart, first clear any menu from the screen by pressing the PWR/CLEAR key.

You can’t stop the chart while a menu is displayed. Now press the up arrow key. The chart will freeze and the word “STOP” appears at the top right portion of the screen. To start the chart, press the up arrow key again.

DISPLAY MODE

The X-28 has three different screen modes. To change modes, press the MENU key until the “DISP MODE” (Display Mode) menu ap- pears. Then press the up or down arrow keys until the desired mode number appears. The modes are as follows:

CHT 1 (Chart #1)

1.Automatic On

2.Fish I.D. Off

3.Digital depth display On.

CHT 2 (Chart #2)

This is the High Speed Scroll mode. It has the following features:

1.Automatic Off

2.Fish ID Feature Off

3.All Digital Displays Off

12