Now
press the key adjacent to
the desired display. For ex-
ample, to turn the
temperature
display
on, press
the key adja-
cent to the "INCLUDE TEMP."
label. Once you do this, the
digital display in the corner of
the screen will show the tem-
perature
in addition to the
depth.
The temperature menu label
nowshows "REMOVETEMP."
You can turn each
displayon
or
off individually.
MENU -
PAGE 3
CHART CURSOR The X-55A has a chart cursor
that allows you to pinpoint a
target's depth. The cursor is
simply a horizontal line that
extends acrossthe displayfrom
left to right. A depth box at the
end of the line on the right
side
shows the line's depth. In the
example below,
the cursor
(line)
is at 30.0 feet.
To display the chart cursor,
pressthe
menu
keythreetimes.
key adjacent to the 'TURN
CHART CURSOR OFF" label.
The X-55A returnsto the sonar
screen with the chart cursor
turned off.
To turn the zoom bar
off,
press
the MENU key until the third
menu
page appears,then press
the key adjacent to the "RE-
MOVE ZOOM BAR' label.
Note:
Turning
the zoom bar on
also turns the zoom feature on.
To turn the zone bar
off, press
the MENU key until the third
menu
page appears,
then press
the key adjacent to the "RE-
MOVE ZONE BAR" label.
Note: Turning the zone bar on
also turns the zone alarm on.
26 27
597FT lfl REMOVE DEP
67.9 °F REMOVE TEMP. I
AUTO 0
52.OFT K;;
it' 98
________ 60 Press the CLEAR key
to exit from this menu or wait approximately ten
seconds and the menus will automatically clear.
To turn the entire digital box
off, press
the MENU key twice, then press
the
key next to the 'TURN DIGITAL BOX OFF" label. The unit will return to the
sonar display
with the
digital box erased from the screen. To turn it on
again, repeat the above steps. The label on the second menu page now
reads 'TURN DIGITAL BOX ON."
DISPLAY ZOOM BAR
When the unit is in the zoom
mode, the zoom bar doesn't
normally
show on the screen. __________
The zoom bar shows the sec-
tion of water on the
right side of the screen that the zoom
feature displays
on the left side. To turn the zoom baron
continuously,
first
pressthe
MENU
key until the 3rd menu page
appears. Now press the key j
AUTO
II 33.6 0z
next to the "DISPLAY ZOOM 97.0 FT o
BAR" label. 0
-c
URI'J CHAP. CURSOR OI
U SPLA'i ZOOM BAR
OISPL°? ZINE ALARM BAR
I 2IPb 0(61 '-1L 9flFJOD cw' :Pl-d3E 3
DISPLAYZONE BAR
When the zone alarm is on,
the zone bar doesn't
normally show on the
screen. Toturn the zone baron continuously,
first
press the MENU
key
until
the 3rd menu page appears.
Now
press
the key
next to the
"DISPLAY ZONE BAR" label.
Now
press the key adjacent to the 'TURN CHART CURSOR ON" label. A
screen similar to the one at
right appears. Use the
up
or down
arrow keys
to move the cursor
up or down to the desired depth.
To turn the chart
cursoroff,
pressthe
menu keythreetimes.
Now
pressthe
-c
4C
12 E
29
36
S.60
PDF compression, OCR, web-optimization with CVISION's PdfCompressor