LSI22902/22903 Host Adapter to Intel ISP1100Inter net Server 3
2.1 Setting up the Installation
Important: Make sure the ISP1100 server is turned off and is not
plugged into an electrical outlet. Take all precautions to
minimize ESD. A ground strap is recommended.
Step 1. Identify the parts listed below on the LSI22 902/22903. Refer to
Figure 2 for a photograph of the board.
•Internal Channel B, 68-pin HD connector, J4.
•Hard drive activity LED connector, J3.
•External Channel A, VHDCI 68-pin connector, J2.
Note: Detailed specifications for both boards are contained in the
host adapter user’s guide.
Figure 2 LSI22902/22903 Close-up
Step 2. Remove the top cover of the Intel ISP1100 server by removing
the top plate screw.
Step 3. Carefully slide the top cover plate back until the beveled front
edge clears the chassis.