LSI SYM22801 Figure 2.1 Hardware Connections for the SYM22801 Host Adapter

Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the SYM22801 Host Adapter
Step 6. Carefully insert the edge connector J1 (see Figure 2.1) of the
host adapter into the PCI slot. Make sure the edge connector
is properly engaged before pressing the board into place as
shown in Figure 2.2.
Step 7. To plan on hooking up another host adapter on the same bus
as this host adapter, or an 8-bit device on 68-pin connector, see
the Channel Switches section discussed later in this chapter.
Notice that the components on a PCI host adapter face the opposite way
from those on other non-PCI adapter boards you have in your system.
This is correct, and the board is keyed to go in only one way.
Channel B
LED Connecto
J9
Channel B
68-pin Inte rn a l
High Density
SCSI Interface
J6
Channel A
LED Connector
J5
Channel A
68-pin Inte rn a l
High Density
SCSI Interface
J2
Channel A
68-pin External
VHDCI
SCSI Interface
J3
Channel B
68-pin External
VHDCI
SCSI Interface
J7
SYM22801 to PCI Bus
Connector on Mainboard
J1
Channel B
Termination
Override
Switches
U2
Channel A
Termination
Override
Switches
U1
Channel A
50-pin Internal
Low Density
SCSI Interface
J4
Channel B
50-pin Internal
Low Density
SCSI Interface
J8