Detailed Installation Procedure 2-3
Step 10. Replace the cabinet cover as described in the user’s manual
for your computer.
Step 11. Make all external SCSI bus connections.
Remember: The SCSI bus requires proper termination, and no duplicate
SCSI IDs.
Step 12. Finally, refer to the
PCI SCSI Device Management System
SDMS 4.0 User’s Guide
(or the guide for the software that you
will use) to load the driver software for your particular operating
system.
2.2 Detailed Installation Procedure
This section provides step-by-step instructions for installing th e
SYM22801 host adapter and connecting it to your SCSI peripherals. If
you are experienced in these tasks, you may prefer to use the precedin g
Section 2.1, “Quick Installation Procedure.” If you are not confident that
you can perform the tasks as described here, LSI Logic suggests gettin g
assistance.

2.2.1 Before You Start

Before you start, look through the task list below to get an overall idea
of the steps to perform.
Open your PC cabinet and select an open PCI slot
Insert the host adapter
Connect your SCSI peripherals
– Internal
–External
Terminate the SCSI bus
Set the peripheral SCSI IDs
Make any configuration changes
Close your PC cabinet
Install the software