3-4 Configuring the Host Adapter
Below the list of host adapters on the Main Menu display, you see eight
options. They are described in detail below. If these settings are altered,
the system will reboot after the Quit option is selected, which allows the
user to exit from the Configuration Utility.
3.2.1.1 Change Adapter Status
The change adapter status allows the user to activate or deactivate a
host adapter and all SCSI devices attached to it. When this option is
used to make a change, the change takes place after a reboot upon exit
from the utility. Here is an example of the Change Status on Next Boot
Menu:
To change an adapter's status, select it and press Enter. Press the
Escape (Esc) key to exit from this menu.
3.2.1.2 Adapter Boot Order
The adapter boot order allows the user to set the order in which host
adapters will boot when you have more than one LSI Logic host adapte r
in your system. When this option is selected, the Boot Order menu
appears. Here is an example of the Boot Order Menu:
Main Menu
Change Status on Next Boot:
Port
Num Irq---------Status--------NVRAM
Level Current Next-Boot Found
SYM53C875
SYM53C875
SYM53C895
FC00
F800
F801
9
9
9
On
On
On
On
Off
Off
Yes
Yes
Yes
Main Menu
BootSeq Bus DevFunc BootSeq Bus DevFunc
0 SYM53C875 00 A0 1 SYM53C875 00 98
2 SYM53C895 00 90