LST 55100-908 specifications Manual Call Point, Activation by pressing in the pane of plastic

Manual Call Point

55100-908

•ADM loop technology with Apollo/Discovery protocol

•Activation by pressing in the pane of plastic

•Two-coloured LED indicates activation and fault

•Integrated dual-isolator

•Operating instructions by means of standardised symbols

Description

The Manual Call Point 55100-908 complies with the standard EN 54-11/A and is designed for use in ADM loops with Apollo/Discovery protocol.

The detector is activated by pressing in the pane of plastic. By means of a special key, the pane can be put back to the idle position, thereby resetting the de- tector.

The two-coloured status LED indicates the activation of the detector in red colour and the fault condition in yel-

low colour. The detector address is selected by means of a DIL switch. A dual-isolator, which is integrated into the detector, disconnects the adjacent loop elements fast and safely in case of a short circuit.

The detector is fi tted into a plastic case and can be mounted on a 60mm fl ush-mount installation box. By means of the supplied case, surface mounting on a wall is also possible.

Specifications

Operating voltage	Supply through loop voltage
Current consumption	100µA (quiescent)
Ambient temperature	-20°C to +60°C (no condensation or icing)
Relative humidity	max. 95% (no condenstation)
Protection class	IP24
Dimensions W × H × D
with surface mount box	89 × 93 × 59 (mm)
installation on fl ush-mount installation box	89 × 93 × 28 (mm)
Colour	fl ame red, RAL 3000
Weight	160g
Order number	245015
Order name	Manual Call Point/Red/XP95/ISM/Flexi 55100-908

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	55100-908_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED