Optical-Thermal Detector
AMS-58000-700
•ADM loop technology with Apollo/Discovery protocol
•Combination of optical and thermal characteristics of fire
•Alarm temperature 58°C
•Several sensitivity levels as well as
•Constant response sensitivity
•Sealed electronics
Description
The addressable
The response sensitivity and the operating mode of the detector can be selected in 5 steps
The proven ADM loop technology with Apollo/Discove- ry protocol establishes a permanent communication between the fi re detection control panel and the de-
tector. That ensures a periodical function testing of the detector.
The infl uence of contamination of the optical measure- ment system is compensated for by using intelligent evaluation algorithms. With that, the response sensiti- vity of the detector is kept constant for a long time – a further effective step to avoid false alarms.
The two LEDs with 360° visibility indicate the activa- ted condition of the detector. The detector address is selected by means of a code card in the detector base. Therefore the detector can be changed without additional tools.
The detector can be attached to various bases and it can be protected against theft.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • | |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|